Wiring Connection - Kenwood KDC-U463 Instruction Manual

INSTALLATION / CONNECTION

Wiring connection

(for
Connecting the ISO connectors on some VW/Audi or
Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
Pin Color and function
A4 Yellow : Battery
A5 Blue/White : Power control
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
Purple ]
B1
: Rear speaker (right)
Purple/black [
B2
Gray ]
B3
: Front speaker (right)
B4 Gray/black [
White ]
B5
: Front speaker (left)
White/black [
B6
Green ]
B7
: Rear speaker (left)
B8 Green/black [
16
/ /
Antenna terminal
Ignition wire Yellow (Battery wire)
(Red)
Red (Ignition wire)
Unit
Battery wire
(Yellow)
Red (A7)
Yellow (A4)
/ )
Front output
Rear/ subwoofer output
Fuse (10 A)
If no connections are made, do not let the wire come out from the tab.
Brown
(Mute control wire)
Blue/White
(Power control wire/
Antenna control wire)
Light blue/yellow
(Steering remote control
wire)
ISO connectors
Rear/ subwoofer output
To the terminal that is grounded
when the telephone rings or during
MUTE
conversation ( 12)
(To connect the Kenwood navigation
system, refer your navigation
manual.)
ANT CONT
To the power control terminal when
using the optional power amplifier
P. CONT
or to the antenna control terminal in
the vehicle
STEERING WHEEL
REMOTE INPUT
To the steering wheel remote control
REMOTE CONT adapter