Getting Started - Kenwood DPX520BT Instruction Manual

GETTING STARTED

1
Cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: "CANCEL DEMO" "PRESS" "VOLUME KNOB"
1
Press the volume knob.
[YES] is selected for the initial setup.
2
Press the volume knob again.
"DEMO OFF" appears.
2
Set the clock
1 Press FNC to enter [FUNCTION].
2
Turn the volume knob to select [CLOCK], then press the knob.
3
Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
5
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6
Turn the volume knob to select [12H] or [24H], then press the knob.
7
Press and hold to exit.
To return to the previous setting item, press
4
3
1
Press
2
Press FNC to enter [FUNCTION].
• Pressing AUDIO enter [AUDIO CONTROL] directly.
3
Turn the volume knob to make a selection (see the following table),
then press the knob.
4
Repeat step
5 Press and hold
To return to the previous setting item, press
AUDIO CONTROL
SP SELECT
DISPLAY
EASY MENU
TUNER SETTING
PRESET TYPE
.
Set the initial settings
repeatedly to enter STANDBY.
3
until the desired item is selected or activated.
to exit.
OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches
or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum
performance.
ON: Both display and button illumination change to white color when
entering [FUNCTION]. ; OFF: Both display and button illumination
remain as [COLOR SELECT] color. ( 19)
NORMAL: Memorizes one station for each preset button in each band
(FM1/ FM2/ FM3/ AM). ; MIX: Memorizes one station for each preset
button, regardless of the selected band.
.
Default: XX