Aux; Audio Settings - Kenwood KDC-U463 Instruction Manual

AUX

Preparation:
Select [ON] for [BUILT-IN AUX]. ( 5)
Start listening
1
Connect a portable audio player (commercially
available).
Auxiliary input jack
3.5 mm stereo mini plug with "L" shaped
connector (commercially available)
2
Press repeatedly to select AUX.
3
Turn on the portable audio player and start
playback.
Set the AUX name
While listening to a portable audio player connected to
the unit...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [SYSTEM], then
press the knob.
3
Turn the volume knob to select [AUX NAME SET],
then press the knob.
4
Turn the volume knob to make a selection, then
press the knob.
AUX (default)/ DVD/ PORTABLE/ GAME/ VIDEO/ TV
5
Press and hold to exit.
To return to the previous setting item, press
10

AUDIO SETTINGS

While listening to any source...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [AUDIO CONTROL], then press the knob.
For
3 Turn the volume knob to make a selection (see the following table), then press the
knob.
4 Repeat step
Portable audio
5 Press and hold
player
(or using RC-406)
1 Press AUD to enter [AUDIO CONTROL].
Press J / K to make a selection, then press
2
To return to the previous setting item, press
SUB-W LEVEL
BASS LEVEL
MID LEVEL
TRE LEVEL
EQ PRO
BASS ADJUST
MID ADJUST
.
/ / /
/ : Pressing AUD enters [AUDIO CONTROL] directly.
3 until the desired item is selected or activated.
to exit.
–15 to +15 (0) Adjusts the subwoofer output level.
–8 to +8 (+6)
Adjusts the level to memorize for each source. (Before making an adjustment,
–8 to +8 (+5)
select the source you want to adjust.)
–8 to +8 (0)
60/ 80/ 100/ 200 or 60HZ/ 80HZ/ 100HZ/ 200HZ: Selects the center
BASS CTR FRQ
frequency.
BASS LEVEL –8 to +8 (+6): Adjusts the level.
BASS Q FACTOR 1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels.
0.5K/ 1.0K/ 1.5K/ 2.5K or 0.5KHZ/ 1.0KHZ/ 1.5KHZ/ 2.5KHZ: Selects the
MID CTR FRQ
center frequency.
MID LEVEL –8 to +8 (+5): Adjusts the level.
MID Q FACTOR 0.75/ 1.00/ 1.25: Adjusts the quality factor.
/ /
.
.
Default: XX
/