Fantasea Line FG7X Instruction Manual page 32

ATTENTION – IMPORTANT NOTICES
1. FG7X Housing's White O-Ring Installation
The FG7X Housing has a double main seal for increased protection against flooding (see FG7X
Housing's instruction manual - pages 14, 15). The black main O-ring is located on the clear back
door. The white main O-ring is located on the
perimeter of the black front part of the
housing.
Please note that the white O-ring is not
symmetrical and should be inserted with its
rounded edge facing inward (into its seat) and
its pointed edge facing outward or it may
affect housing functionality. See illustration.
Attention: Please note that this O-ring does not
need to be removed or replaced unless it is
visibly damaged. For regular O-ring
maintenance, just wipe its surface with a moist
cloth while it is installed in place.
2. FG7X Housing's Exposure Compensation Dial
The Exposure Compensation dial (Item 3, pages 6,
7) is located on the top right corner of the housing's
clear back door when viewing the housing from the
screen side.
The proper way to operate this dial is to grasp it
using the thumb and forefinger and rotate to the
left or right in the direction of the +3 to -3 marking
on the dial.
Attention: Please do not rotate the housing dial
beyond its two end points (+3 and -3) as it will slip
on the camera dial rather than rotate it. This can
easily be avoided by tracking the progress of the
rotation indicator on the Camera LCD screen while the dial is in use.
Exposure
Compensation Dial
Fantasea FG7X Housing Important Notices 20150310