Figure 9 Outlaw Controls - Tesoro Outlaw Operator's Instruction Manual

basis for setting the controls on your detector.
Using your Outlaw Metal Detector in the field will
allow you to learn the detector's responses to
various conditions and will guide you in fine
tuning the detector's operating controls.
GROUND BAL
This rotary control switch has one function:
Adjust the ground balance of the detector.
Turning the knob counterclockwise (-direction) will move the ground balance in a negative
direction. Turning the knob clockwise (+direction) will move the ground balance in a positive
direction.
MODE
This three-position switch has two functions:
Select the operating MODE (ALL METAL or Discriminate DISC)
Select the retune speed of the ALL METAL MODE (No Motion or AUTO Tune)
RETUNE
This push button has two functions:
Put the detector in the ALL METAL MODE
Retunes the threshold of the current signal
open in browser PRO version
Are you a developer? Try out the HTML to PDF API
Figure 9 – Outlaw Controls
pdfcrowd.com