1 8" Round, Concentric
Searchcoil with 3.5' Cable
1 12x10" Wide Scan Searchcoil
with 3.5' Cable
1 9 volt Alkaline Battery
3 One Wrap Velcro Strips (to hold
coil cables)
1 Operator Instruction Manual
1 Warranty Card
GETTING STARTED
If any of these items are missing, immediately contact the Tesoro Authorized Dealer where you
purchased your detector.
Assembly of the Outlaw is simple and requires no special tools. Just install the battery, mount
the searchcoils on the lower pole assemblies, connect the three pole assemblies together,
wrap the excess cable around the pole and plug the cable into the control housing. Finally,
adjust the pole length and searchcoil angle and you're ready!
INSTALLING THE BATTERY
open in browser PRO version
Are you a developer? Try out the
HTML to PDF API
Figure 1 – Out of the Box
pdfcrowd.com