Ricoh SG 2100N User Manual page 334

2. Information for This Machine
This chapter describes laws and regulations related to this machine.
Laws and Regulations
Legal Prohibition
Do not copy or print any item for which reproduction is prohibited by law.
Copying or printing the following items is generally prohibited by local law:
bank notes, revenue stamps, bonds, stock certifi cates, bank drafts, checks,
passports, driver's licenses.
The preceding list is meant as a guide only and is not inclusive. We assume no re-
sponsibility for its completeness or accuracy. If you have any questions concerning
the legality of copying or printing certain items, consult with your legal advisor.
This machine is equipped with a function that prevents making counterfeit bank
bills. Due to this function the original images similar to bank bills may not be
copied properly.
Notes to users in USA and CANADA
This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency
(RF) Exposure rules. This equipment should be installed and operated keeping
the radiator at least 20cm or more away from person's body (excluding extremities:
hands, wrists, feet and ankles).
Remarques a l'attention des utilisateurs canadiens
Cet equipement est conforme aux limites d'exposition aux rayonnements enoncees
pour un environnement non controle et respecte les regles les radioelectriques
(RF) de la FCC lignes directrices d'exposition dans le Supplement C a OET65 et
d'exposition aux frequences radioelectriques (RF) CNR-102 de l'IC. Cet equipe-
ment doit etre installe et utilise en gardant une distance de 20 cm ou plus entre
le dispositif rayonnant et le corps (a l'exception des extremites : mains, poignets,
pieds et chevilles).
Notes to USA Users of FCC Requirements
Part 15 of the FCC Rules
Declaration of Conformity
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Responsible party: Ricoh Americas Corporation
Address: 5 Dedrick Place, West Caldwell, NJ 07006
Telephone number: 973-882-2000
Product Name: Multi Function Peripheral
Model Number: SG 3100SNw/Afi cio SG 3100SNw, SG 3110SFNw/Afi cio SG
3110SFNw
Note:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio /TV technician for help.
Caution:
Changes or modifi cations not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
Part 68 of the FCC Rules regarding Facsimile Unit
1. This equipment complies with Part 68 of the FCC rules and requirements adopt-
ed by the ACTA. On the cover of this equipment is a label that contains, among
other information, a product identifi er in the format US:AAAEQ##TXXXXX. If
requested, this number must be provided to the telephone company.
2. This equipment uses the RJ11C USOC jack.
3. A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and modular
plug is provided with this product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation instructions for detail.
4. The REN is used to determine the number of devices that may be connected to
a telephone line. Excessive RENs on a telephone line may result in the devices
not ringing in response to an incoming call. In most but not all areas, the sum of
RENs should not exceed fi ve (5.0). To be certain of the number of devices that
may be connected to a line, as determined by the total RENs, contact the local
telephone company. The REN for this product is part of the product identifi er
that has the format US:AAAEQ##TXXXXX. The digits represented by ## are
the REN without a decimal point (e.g., 03 is a REN of 0.3).
5. If this equipment causes harm to the telephone network, the telephone com-
pany will notify you in advance that temporary discontinuance of service may
be required. But if advance notice is not practical, the telephone company will
notify the customer as soon as possible. Also, you will be advised of your right
to fi le a complaint with the FCC if you believe it is necessary.
6. The telephone company may make changes in its facilities, equipment, op-
erations or procedures that could affect the operation of the equipment. If this
happens the telephone company will provide advance notice in order for you
to make necessary modifi cations to maintain uninterrupted service.
7. If trouble is experienced with this equipment, for repair or warranty information,
please contact Ricoh Americas Corporation Customer Support Department at
1-800-FASTFIX. If this device is causing problems with your telephone network,
the telephone company may request that you disconnect the equipment until
the problem is resolved.
8. In the event of operation problems (document jam, copy jam, communication
error indication), see the manual provided with this machine for instruction on
resolving the problem.
9. Connection to party line service is subject to state tariffs. Contact the state
public utility commission, public service commission or corporation commission
for information.
10. If your home has specially wired alarm equipment connected to the telephone
line, ensure the installation of this equipment does not disable your alarm
equipment. If you have questions about what will disable alarm equipment,
consult your telephone company or a qualifi ed installer.
WHEN PROGRAMMING EMERGENCY NUMBERS AND/OR
MAKING TEST CALLS TO EMERGENCY NUMBERS:
1. Remain on the line and briefl y explain to the dispatcher the reason for the call
before hanging up.
2. Perform such activities in the off-peak hours, such as early morning hours or
late evenings.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person
to use a computer or other electronic device, including FAX machines , to send any
message unless such message clearly contains in a margin at the top or bottom of
each transmitted page or on the fi rst page of the transmission, the date and time
it is sent and an identifi cation of the business or other entity, or other individual
sending the message and the telephone number of the sending machine or such
business , other entity, or individual. (The telephone number provided may not be a
900 number or any other number for which charges exceed local or long -distance
transmission charges.)
In order to program this information into your FAX machine , you should complete
the following steps : Follow the FAX HEADER programming procedure in the Pro-
gramming chapter of the operating instructions to enter the business identifi cation
and telephone number of the terminal or business . This information is transmitted
with your document by the FAX HEADER feature. In addition to the information ,
be sure to program the date and time into your machine.
Notes to Canadian Users of IC Rules
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Remarques a l'attention des utilisateurs cana-
diens
Le present appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence.
L'exploitation est autorisee aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme
si le brouillage est susceptible d'en compromettre le fonctionnement.
Note to users in Canada
Note:
This Class B digital apparatus complies with Canadian ICES-003.
Note:
Under Industry Canada regulations, this radio transmitter may only operate using
an antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary for successful communication.
Remarque concernant les utilisateurs au Canada
Avertissement:
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Avertissement:
Conformement a la reglementation d'Industrie Canada, le present emetteur
radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou
inferieur) approuve pourl'emetteur par Industrie Canada. Dans le but de reduire
les risques de brouillage radioelectrique a l'intention des autres utilisateurs, il faut
choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnee
equivalente (p.i.r.e.) ne depasse pas l'intensite necessaire a l'etablissement d'une
communication satisfaisante.
Important Safety Instructions for Fac-
simile Unit
When using your telephone equipment, basic safety precautions should always be
followed to reduce the risk of fi re, electric shock and injury to persons, including
the following:
•
Do not use this product near water, for example, near a bath tub, wash bowl,
kitchen sink or laundry tub, in a wet basement or near a swimming pool.
•
Avoid using a telephone during an electrical storm. There may be a remote
risk of electric shock from lightning.
•
Do not use a telephone in the vicinity of a gas leak to report the leak.
•
Use only the power cord and batteries indicated in this manual. Do not dispose
of batteries in a fi re. They may explode. Check with local codes for possible
special disposal instructions.
Save these instructions.
IMPORTANTES MESURES DE SÉCURITÉ
Certaines mesures de sécurité doivent être prises pendant l'utilisation de material
téléphonique afi n de réduire les risques d'incendie, de choc électrique et de bles-
sures. En voici quelques-unes:
•
Ne pas utiliser l'appareil près de l'eau, p.ex., près d'une baignoire, d'un
lavabo, d'un évier de cuisine, d'un bac à laver, dans un sous-sol humide ou
près d'une piscine.
•
Éviter d'utiliser le téléphone (sauf s'il s'agit d'un appareil sans fi l) pendant
un orage électrique. Ceci peut présenter un risque de choc électrique causé
par la foudre.
•
Ne pas utiliser l'appareil téléphonique pour signaler une fuite de gaz s'il est
situé près de la fuite.
•
Utiliser seulement le cordon d'alimentation et le type de piles indiqués dans ce
manual. Ne pas jeter les piles dans le feu: elles peuvent exploser. Se conformer
aux règlements pertinents quant à l'élimination des piles.
Conserver ces instructions.
Notes to Canadian Users
This product meets the applicable Industry Canada technical specifi cations.
The Ringer Equivalence Number is an indication of the maximum number of devices
allowed to be connected to a telephone interface. The termination on an interface
may consist of any combination of devices subject only to the requirement that the
sum of the RENs of all the devices does not exceed fi ve.
Remarques à l'attention des utilisateurs cana-
diens
Le présent matériel est conforme aux spécifi cations techniques applicables
d'Industrie Canada.
L'indice d'équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de
terminaux qui peuvent être raccordés à une interface téléphonique. La terminaison
d'une interface peut consister en une combinaison quelconque de dispositifs, à
la seule condition que la somme d'indices d'équivalence de la sonnerie de tous
les dispositifs n'excède pas 5.
ENERGY STAR Program
®
ENERGY STAR Program Requirements for Imaging Equipment
®
The ENERGY STAR Program Requirements for Imaging Equipment encour-
age energy conservation by promoting energy effi cient computers and other
offi ce equipment.
The program backs the development and dissemination of products that feature
energy saving functions.
It is an open program in which manufacturers participate voluntarily.
Targeted products are computers, monitors, printers, facsimiles, copiers,
scanners, and multifunction devices. Energy Star standards and logos are
internationally uniform.
Low Power Mode (Energy Saver mode)
If this machine remains idle for a specifi ed period, it automatically reduces its
electrical consumption. To exit Low-power (Energy Saver) mode, press the [Power]
key. For more information about how to confi gure Energy Saver mode, see "Timer
Settings", User Guide as a HTML fi le on the CD-ROM.
Specifi cations
•
Energy Saver mode Power Consumption SG 3100SNw: 3.0 W
•
SG 3110SFNw: 4.0 W
Default Interval 15 minutes
•
Recovery Time SG 3100SNw: 2.4 second
•
SG 3110SFNw: 1.9 second
Note
Power Consumption and Recovery Time may differ depending on the conditions
and environment of the machine.
Even if its main power switch is turned to OFF, this machine will consume low levels
of electricity. To stop this machine consuming electricity, disconnect the power cord
from the wall outlet.
Notes on lamp(s) inside this machine
Notes to users in the state of California
Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazard-
ouswaste/perchlorate
© 2012
Printed in China
EN US
J030-6622