Ricoh SG 2100N User Manual page 252

8. Troubleshooting
Detach the duplex unit or open the rear cover, and then remove the jammed paper.
See page 237 "Removing Paper Jammed in the Duplex Unit", page 232 "Opening the Rear Cover to
Remove Jammed Paper".
Paper Misfeed Remove Duplex or / Tray2 Rear Cover remove misfeed
Paper has jammed in the duplex unit or rear unit of Tray 2.
Detach the duplex unit or open the rear unit cover, and then remove the jammed paper.
See page 231 "Paper Jam in the Duplex Unit and Tray 2/3"
Paper Misfeed remove Tray # / or Rear Covers, remove misfeed
Paper has jammed in the tray (Tray 2 or 3).
Remove the jammed paper.
See page 227 "Paper Jam in Tray 2/3"
Paper Misfeed Tray # / Remove tray(s), reset paper
A paper misfeed has occurred in the tray (Tray 1, 2, or 3).
Reposition the paper in the paper tray, and then press the [Form Feed] key.
See page 100 "Loading Paper".
Prepare new Ink Collector Unit
The ink collector unit is almost full.
Make sure you have a new ink collector on hand.
If a print cartridge starts running out of ink when the ink collector unit is almost full, the alert indicator will
flash and a message informing you of the cartridge's low ink level will appear on the display.
Processing...
The machine is printing.
Ready
The machine is able to print.
Rear Cover is open / Close Rear Cover
The rear cover is open.
Close the rear cover.
See page 256 "Cover Open"
Remove Misfeed Duplex Unit / Remove Misfeed from Duplex Unit
Paper has jammed in the duplex unit.
Open the duplex unit cover or detach the duplex unit, and then remove the jammed paper.
See page 231 "Paper Jam in the Duplex Unit"
250