Gree CROWN09HP230V1A Quick Start Manual

INDOOR UNIT FRONT PANEL DISPLAY: Look here for LED display of system
status, setpoint, indoor and outdoor temperatures and malfunction codes.
QUICK-START GUIDE
HIGH-WALL DUCTLESS
AIR CONDITIONING & HEATING SYSTEM
Models:
CROWN09HP230V1A CROWN12HP230V1A CROWN18HP230V1A
NOTE: Please read the complete owner's manual
carefully before operation.
Press to power the unit on or off.
Press to raise settings including temperature and time.
Press to lower settings including temperature and time.
Press to select COOL mode
Press to select HEAT mode
Press to select fan speed (Ultra-Low, Low, Low-Medium, Medium,
Medium-High, High or Turbo).
Press to activate; allows unit to sense temperature at the remote controller.
Press to control vertical angle of louvers and to redirect airflow.
Press to select and adjust each mode.
: HEAT
: COOL
Press to control horizontal angle of louvers and to redirect airflow.
Press to start the timer. (Adjust with "+" and "–" buttons.)
See Owner's Manual for more details.
Press to display time of day or time remaining on timer.
Press to stop the timer. (Adjust with "+" and "–" buttons.)
See Owner's Manual for more details.
Use for initial setup of remote controller. See Owner's Manual for more details.
Automatically runs fan after unit is turned off, to remove moisture from coil.
Use to program select functions in Sleep Mode. See Owner's Manual for
more details.
Press to turn on lights on the unit's Front Panel Display. Press again to turn off.
Press to select one of four SLEEP modes, each offering varying levels
of comfort control while sleeping. See Owner's Manual for more details.
Press and hold three seconds to turn WiFi functions on or off.
See Owner's Manual for more details.
: DRY : AUTO
: FAN ONLY