Page 2
Introduction for buttons on adjust fan blowing angle. remote controller • When selecting heating mode, the air condition er operates under heat mode. Press "6" or" V" NOTE button to adjust set temperature. Press "FAN" • This is a general use remote controller. It could be button to adjust fan speed.
Page 3
turn to quick CO O L or quick HEAT mode."®" ically swing up & down at maximum angle. icon is displayed on remote controller. Press this • When selecting "-0,..-0, 0, p ", air condition .,.. button again to exit turbo function and "@" icon er is blowing fan at fixed position.
Page 4
NOTE temperature will increase 1 , two hours, setting · temperature increased 2 then the unit will run at • Under on and off status, you can set T-OFF or T-ON this setting temperature; In Heat mode: sleep simultaneously. • Before setting T-ON or T-OFF, please adjust the status after run for one hour, the setting tempera...
Under off status, press "MODE" and " WiFi " buttons Function introduction for combination buttons simultaneously for 1 s, WiFi module will restore factory settings. Energy-saving function NOTE • The function is only available for some models Under cooling mode, press "TEMP" and "CLOCK" buttons simultaneously to start up or turn o ff ener...
function Child lock function Press "MODE" and "SLEEP" buttons simultaneou Press and "'7" simultaneously to turn on or "t," turn off child lock function. When child lock func sly to start function. tion is on," 111" icon is displayed on remote control function is for limiting power of the whole unit.
Page 7
*Note: Not all models have the above features. Gree New Zealand greeac.co.nz In New Zealand, call 0800 289 4733 or email hello@greeac.co.nz...
Need help?
Do you have a question about the YAP1F7 and is the answer not in the manual?
Questions and answers