Ram Module - Panasonic CF-37 Series Reference Manual

RAM Module

RAM Module Slot
Module Cover
RAM Module
2
Hooks
2
Use a RAM module meeting the RAM module specifications below. If a module is used
that does not meet the specifications, there are cases in which data may become unus-
able or the computer may not operate properly.
RAM module specifications
144 pins, SO-DIMM, 3.3 V, SDRAM, PC100 Compliant
CAUTION
RAM modules are extremely sensitive to static electricity. There are cases where
static electricity generated by the human body has adversely affected such mod-
ules. In addition, it is easy to damage the RAM modules or internal components
of the computer. Therefore, when installing or removing a RAM module, handle
the module with extreme care.
If the total amount of memory exceeds 256MB, the computer may not operate
properly.
Installing/Removing the RAM Module
1
Power off your computer
Do not shut down using the standby or hibernation mode.
2
Remove the cover
3
Remove the battery pack
4
Installing the RAM module
Lift the module cover up.
2
Slide in the module at an angle.
Snap the module into place by pushing down on it.
The module cover locks when it is pushed in.
Removing the RAM module
Open the left and right hooks.
2 Gently remove the RAM module from the slot.
5
Put the battery pack and the cover back into place
( page 30, 31)
( "Starting Up/Shutting Down")
( page 30)
( page 30)
Only a RAM module designed
for PC100 can be added.
40