Panasonic CF-37 Series Reference Manual page 53

Setup Utility
Advanced Menu
Plug & Play:
Serial Port A:
Device:
Serial Port B:
Device:
Parallel Port:
Mode:
USB Floppy Boot:
Internal Modem / LAN:
Wake up from LAN:
Parameters
(
Plug & Play
Serial Port A* 1
Device*
3
Base I/O* 2
Serial Port B*
1
Device* 3
Base I/O*
4
Parallel Port* 1
Mode*
5
Base I/O*
6
USB Floppy Boot* 8
Internal Modem / LAN
Wake up from LAN*
* If [Enable] is set, sub items will be displayed.
1
* This item is displayed only when [Serial Port A] is set to [Enable].
2
* 3 [Touchscreen] can be set in either [Serial Port A] or [Serial Port B].
* 4 This item is displayed only when [Serial Port B] is set to [Enable].
* Setting impossible when [Parallel Port] is set to [Disable].
5
* This item is displayed only when [Parallel Port] is set to [Enable].
6
* Setting impossible when [Mode] is set to [EPP].
7
* Be sure to connect the optional FDD (CF-VFDU03) when [USB Floppy Boot] is set to [Enable]. Do not use the optional FDD
8
(CF-VFDU03) simultaneously with the SuperDisk drive.
Windows 2000
* 9 The setting on Windows is given to priority.
: Default)
Disable
Enable
Disable
Enable
Auto
Serial Connector
Touchscreen
3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3
Disable
Enable
Auto
Touchscreen
IrDA
3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3
Disable
Enable
Auto
Uni-directional
Bi-directional
ECP
EPP
378/IRQ7 278/IRQ5 3BC/IRQ7*
Disable
Enable
Disable
Enable
9 Disable
Enable
[Disable]
[Auto]
[Serial Connector]
[Auto]
[Touchscreen]
[Auto]
[ECP]
[Disable]
[Enable]
[Disable]
7
53