Panasonic TOUGHBOOK CF-37 Series Reference Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Laptop
  5. CF-37 Series
  6. Reference manual
Panasonic TOUGHBOOK CF-37 Series Reference Manual

Panasonic TOUGHBOOK CF-37 Series Reference Manual

Hide thumbs Also See for TOUGHBOOK CF-37 Series:
Table of Contents

Advertisement

Quick Links

See also: Reference Manual
95
Illustrations in this Reference Manual
NOTE:
CAUTION:
WARNING:
[Start]-[Shut Down]:
Enter :
Fn + F5 :
page:
:
We recommend that this Reference Manual be printed.
NOTE provides a useful fact or helpful information.
CAUTION indicates a condition that may result in minor or moderate injury.
WARNING indicates a hazard that may result in moderate or serious injury.
This illustration means to click [Start], then to click [Shut Down].
(For some applications, you may need to double-click.)
This illustration means to press the [Enter] key.
This illustration means to press and hold the [Fn] key, then press the [F5] key.
When the cursor is moved to an item under [Contents] or to
shape of the cursor will change to
click is made), the corresponding page in the Reference Manual will be displayed.
This illustration means to refer to the Operating Instructions.

Reference Manual

Contents
Read Me First ......................................................2
Key Combinations ..............................................4
LED Indicators .................................................... 5
Touch Pad (Advanced) .......................................6
Touchscreen ..................................................... 11
Display Rotation Tool ....................................... 14
Suspend/Hibernation Functions .....................15
Security Measures ........................................... 18
Computing On The Road ..................................22
Battery Power ...................................................25
Multimedia Pocket ............................................32
CD-ROM/DVD-ROM Drive ................................. 33
TM
Drive .............................................36
PC Cards ........................................................... 38
RAM Module ......................................................39
Printer ................................................................40
External Display ...............................................41
USB Devices ..................................................... 42
Infrared Data Communications ....................... 44
Modem ............................................................... 46
Hard Disk Drive................................................. 47
Setup Utility ......................................................48
Smart Boot ........................................................ 54
Technical Information ......................................55
DMI Viewer ........................................................ 56
List of Error Codes ........................................... 57
. Under this condition, if characters are tapped (or a
Personal Computer
CF-37
page (green display), the
®
Series

Advertisement

Table of Contents
loading

Related Manuals for Panasonic TOUGHBOOK CF-37 Series

Summary of Contents for Panasonic TOUGHBOOK CF-37 Series

  • Page 1: Table Of Contents

    Read Me First ............2 Key Combinations ..........4 LED Indicators ............ 5 Touch Pad (Advanced) ........6 Touchscreen ............. 11 Panasonic Hand Writing (Touchscreen) ..13 Display Rotation Tool ........14 Suspend/Hibernation Functions .....15 Security Measures ........... 18 Computing On The Road ........22 Battery Power ...........25...

  • Page 2: Read Me First

    Read Me First Saving Data on the Hard Disk Do not expose your computer to shock. Please use care when handling your computer, shock may damage your hard disk or make your software applications and data unusable. Do not power off your computer while software applications are running or HDD indicator ( ) is on.
  • Page 3 Read Me First Usage Environment Environment Place the computer on a flat stable surface. In use: Temperature: 5 °C to 35 °C {41 °F to 95 °F} Humidity: 30% to 80% RH (No condensation) Not in use: Temperature: -20 °C to 60 °C {-4 °F to 140 °F} Humidity: 30% to 90% RH (No condensation) Places not to use your computer...

  • Page 4: Key Combinations

    Key Combinations CAUTION Do not press the following key combinations repeatedly in (quick) succession. Do not press the following key combinations while using the touch pad (mouse) or other keys. When a MIDI file is playing, do not use the following key combinations. The tempo of the MIDI file may temporarily slow. Functions Popup Window Pressing this key combination adjusts the brightness...

  • Page 5: Led Indicators

    LED Indicators Caps Lock This indicator lights green when Caps Lock is pressed. Subsequent non- shifted input is capitalized. These indicators light green when NumLk is pressed. This causes a por- NumLk (Numeric key) tion of the keyboard to function as a numeric keypad. The [Enter] key functions differently depending on the application.

  • Page 6: Touch Pad (Advanced)

    Touch Pad (Advanced) Use the touch pad to move the cursor on the display and perform normal computer operations. Work Surface NOTE The touch pad has been designed to work only when a finger is used. Therefore, do not use any implement on the touch pad. Basic Operation Function Touch Pad Operation...
  • Page 7 Touch Pad (Advanced) Function Touch Pad Operation Pan* Scroll in various directions of a document Operate while holding down the two buttons. Zoom* Magnify Magnify/reduce the display of a Ctrl + Reduce document. Data Zoom* Display or hide a document, or Shift + perform operations to return to or proceed with Internet Explorer.
  • Page 8 Touch Pad (Advanced) CAUTION When [PS/2 Compatible Mouse] is displayed instead of [ALPS GlidePoint] in [Start] - [Settings] - [Control Panel] - [System] - [Device Manager] - [Mouse]: Select [PS/2 Compatible Mouse] and then press [Properties]. Select [Driver] - [Update Driver] and then press [Next]. Select [No, select drive from list] and then press [Next].
  • Page 9 Touch Pad (Advanced) Configuring the Touch Pad When needed, the touch pad can be configured using the following steps. Select from the taskbar or select [Mouse] from [Start] - [Settings] - [Control Panel] Click [Buttons] Set the function to be activated when pressing the left button. Set the function when double-clicking either button or the surface of the Touch Pad.
  • Page 10 Touch Pad (Advanced) NOTE <Easy Launcher> When Easy Launcher is operated, the window displayed on the right is shown. With Easy Launcher, it is possible to start an application, shut Windows down, or operate a window. Some applications may be unable to be closed or minimized.

  • Page 11: Touchscreen

    Touchscreen Your computer is equipped with a touchscreen display allowing you to perform the same operations as the touch pad or mouse by touching the surface of the display with your finger. (The following explanation gives one example (for the default settings). The operation settings can be changed in [Start] - [Programs] - [Updd] - [Settings].) Clicking Moving the cursor...

  • Page 12: Configuring The Touchscreen

    Touchscreen Configuring the Touchscreen When needed, the touchscreen can be configured using the following steps. Select from the taskbar or select [Settings] from [Start] - [Programs] - [Updd] The following screen will appear. Calibration Define the calibration setup. Windows Use when the cursor can not be pointed correctly with Set the “double-click”...

  • Page 13: Panasonic Hand Writing (Touchscreen)

    Do not use any of the following objects, as they may damage the work surface. • Objects with an extremely sharp tip, like screwdrivers and nails. • Objects that leave marks, like ball point pens. Panasonic Hand Writing does not operate properly when the Touchscreen can- not be used. Select...

  • Page 14: Display Rotation Tool

    Display Rotation Tool By running the Display Rotation Tool, it is possible to rotate the LCD computer screen 180 degrees and to perform Touchscreen operations in the rotated mode. Double-Click from the taskbar or press Alt + Ctrl + R . NOTE When changing the key combination: (Only the third key can be changed.)

  • Page 15: Suspend/Hibernation Functions

    Suspend/Hibernation Functions Starting Up Your Computer Quickly If you want to immediately start up and continue an application after shutting down your computer, you can do so by using the suspend or hibernation function. Differences between the suspend and hibernation functions Function Suspend function Hibernation function...

  • Page 16: Resuming Operation

    Suspend/Hibernation Functions NOTE With the method below, you can shut down the computer by using the suspend function. Fn + F7 page Select [Suspend] from the [Start] menu. [Suspend] is deleted from the [Start] menu by unchecking [Allow Windows to manage power use on this computer.] in [Start] - [Settings] - [Control Panel] - [Power] or by unchecking [Show suspend command on Start menu] in [Ad- vanced].
  • Page 17 Suspend/Hibernation Functions Precautions for Using the Suspend or Hibernation Function Save all data before powering off your computer. When restarting from or shutting down to the suspend or hibernation mode, do not touch the touch pad or touchscreen (or move the mouse (serial or PS/2 type) if one is connected).

  • Page 18: Security Measures

    Security Measures To prevent unauthorized access of your computer, the various security measures are provided below. Situation Function to use Reference You do not want your computer to be used without permission Supervisor Password below User Password You want to prevent theft or damage to data by using a disk Prevent operation by page 21 using a disk...

  • Page 19: Setting The Supervisor Password

    Use only the upper horizontal row of numeric keys to input your user password. Do not forget your password. If a password is forgotten you will be un- able to use your computer. Please contact Panasonic Technical Sup- port. When running the Setup Utility, do not leave your computer even for a short time.
  • Page 20 Use only the upper horizontal row of numeric keys to input your user password. Do not forget your password. If a password is forgotten, you will be unable to use your computer. Please contact Panasonic Technical Sup- port. To prevent the changing of your password without permission •...
  • Page 21 Security Measures Preventing theft or damage to data using a disk NOTE In this manual, the followings are described as disks. When using disks, an optional SuperDisk Drive Pack(CF-VFS371) is needed. SuperDisk (120 MB) Floppy disk (720 KB, 1.44 MB) You may choose to protect the data on your computer from being accessed illegally or overwritten accidentally by using a disk.

  • Page 22: Computing On The Road

    Computing On The Road Conserving Power One of the main features of notebook-type computers is that you have the power of computing away from your home or office. In the following, information is provided on how to maximize use of the battery pack which is necessary for such computing. Four Important Points POINT Be sure to charge your battery before and after use.

  • Page 23: Setting Power Management

    Computing On The Road NOTE If you plan to use only the battery pack or set the power management, it is neces- sary to check [Allow Windows to manage power use on this computer] in [Star t] - [Settings] - [Control Panel] - [Power]. If the check is removed, the time may not be displayed properly when operation is resumed from the suspend or hibernation mode or the operating time with the battery pack may become short (the power management function of Windows...
  • Page 24 Computing On The Road Power Management settings Power Management Enable (Always) Enable(Battery)* Disable Functions (Setting at the time of automatically set purchase) 2 min 2 min Never HDD motor timeout 2 min 2 min Never ECO mode timeout Popup window display by pressing Fn + F8 Enabled only when the battery itself is being used.

  • Page 25: Battery Power

    Battery pack or charger may not be working properly. Quickly remove the battery pack and disconnect the AC adapter, then connect them again. If the problem persists, contact Panasonic Technical Support. Blinking orange Battery capacity being refreshed. Blinking orang e Unable to recharge due to violation of temperature limits.
  • Page 26 Battery Power When the remaining battery charge becomes low Save your data and power off your computer Following that: Plug in the AC adapter, and fully charge your battery. Use a spare battery if you have one. If you have neither the AC adapter nor an extra battery, power the computer off. If the suspend or hibernation function is set Red indicator lights Suspend Mode or Hibernation Mode...
  • Page 27 Panasonic Battery Monitor It is possible to display the current battery status and the remaining battery power by running the Panasonic Battery Monitor. Select from the taskbar or select [Panasonic Battery Monitor] from [Start]-[Program]-[Panasonic]. Battery Status AC: AC adapter connected...
  • Page 28 Battery Power Accurately Displaying Battery Capacity The battery pack has a function for measuring, storing, and learning about battery capacity. Using this function properly to accurately display remaining battery capacity requires that the battery pack be fully charged (charged to 100%), then fully discharged, and then fully charged again.
  • Page 29 Battery Power Replacing the Battery Pack When the charge provided by your batter y pack is supplied for only a short period of time, even after fully charging according to the instructions, it may be time to replace your battery pack. The battery pack is a consumable item and therefore will require replacement (CF-VZSU14).
  • Page 30 Battery Power Put the cover back into place Position the cover so that the edge of the cover is aligned with the lines of the computer. Then, while lightly pressing down on the center of the cover (with Latches suppressing the back of the computer by one hand), gently slide the cover until it snaps into place.
  • Page 31 Battery Power Using the Battery Pack as a Second Battery The batter y pack can be used as a second battery by installing into the multimedia pocket. (An optional Second Battery Pack Adapter (CF-VAB371) is required to use the second battery). Cabinet Latch Install the battery pack into the adapter...

  • Page 32: Multimedia Pocket

    Multimedia Pocket You may use an optional DVD-ROM Drive Pack (CF-VDD371), SuperDisk Drive Pack (CF-VFS371) or Battery Pack(CF-VZSU14) with Second Battery Pack Adapter (CF- VAB371) by removing your CD-ROM drive from the multimedia pocket. For more infor- mation, please read the manual that accompanies the optional devices. Installing/Removing a Multimedia Pocket Device Bottom Indicator Power off your computer...

  • Page 33: Cd-Rom/Dvd-Rom Drive

    CD-ROM/DVD-ROM Drive Usage Precautions Do not place items other than discs on the tray. Do not leave the tray in the open position or touch the lens area. Should the lens become soiled by dust or dirt, the unit may not read discs properly. Under some conditions, dust may build up on the optical lens or disc, possibly result- ing in malfunction.
  • Page 34 CD-ROM/DVD-ROM drive Setting a disc <CD-ROM Drive> Label-side up Open the tray Press the eject button and slowly pull out the tray. Installing the device Insert the disc at an angle from the front edge label-side up. Push down until the center holder clicks. C e n t e r Holder Eject Button...
  • Page 35 CD-ROM/DVD-ROM drive Using the CD-ROM/DVD-ROM drive in the MS-DOS mode To use the CD-ROM/DVD-ROM drive in the MS-DOS mode, configure the drive follow- ing the steps below after performing the above steps 1 ~ 9. If the steps listed below are performed without completing steps 1 ~ 9 above first, the drive will not oper- ate properly.

  • Page 36: Superdisk

    SuperDisk Drive NOTE In this manual, the followings are described as disks. SuperDisk (120 MB) Floppy disk (720 KB, 1.44 MB) Please refer to the manual that accompanies the SuperDisk Drive Pack except the following. Usage Precautions Do not leave a disk in the drive while transporting your computer. Remove the disk by pressing the eject button before your computer is OFF or enters the suspend/hibernation mode, so the head locking mechanism may engage when the computer is powered off.
  • Page 37 SuperDisk Drive Formatting the disk The SuperDisk Drive Pack can be used to access both SuperDisks and standard floppy disks. (It may take about 30 minutes to format the SuperDisk. Because of this, be sure to disable the power saving function beforehand by, for example, pressing Fn + F8 so as not to enter the power saving mode while formatting the SuperDisk.) CAUTION An error may occur later in the process of formatting a write-protected medium.

  • Page 38: Pc Cards

    PC Cards Your computer has one PC Card slot. This slot conforms to the PC Card Standard; therefore, communications and SCSI devices may be utilized. The slot allows you to use one Type I or Type II card. CAUTION Please check the PC Cards’ specifications. Be sure the total operating current does not exceed the specified limit.

  • Page 39: Ram Module

    RAM Module CAUTION Use a RAM module meeting the RAM module specifications below. If a module is used that does not meet the specifications, there are cases in which data may become unusable or the computer may not operate properly. RAM modules are extremely sensitive to static electricity.

  • Page 40: Printer

    Printer Power off your computer "Starting Up/Shutting Down") Do not shut down using the suspend or hibernation mode. Connect the printer to your computer Turn on the printer, then turn on your computer Parallel Port Setting your printer Go to [My Computer] - [Printers]. Find your printer’s icon, double-click on it, and click [File] - [Set As Default].

  • Page 41: External Display

    External Display Power off your computer "Starting Up/Shutting Down") Do not shut down using the suspend or hibernation mode. Connect the external display to your computer NOTE For more detailed information, please refer to the operation manual of the external display. Turn on the external display, then turn on your computer External Display Port You can select either an external display, LCD or simultaneous with...

  • Page 42: Usb Devices

    USB Devices CAUTION After a driver has been installed, do not use the suspend or hibernation func- tion. If the suspend or hibernation mode is activated, the computer may not function properly. Power off, then on, using the power switch to resume proper operation.
  • Page 43 USB Devices NOTE Execute the following steps if the operation of a USB device is unstable. When the steps below are implemented, however, faults such as Windows being unable to shut down exist when the USB HUB remains connected. (In such cases, remove the USB HUB.) In [Start] - [Run], input [c:\util\msupdate\usb\usbupd2.exe], then press [OK].

  • Page 44: Infrared Data Communications

    Select [Infrared] in [Hardware types] and press [Next]. Press [Next], and press [Next] again. Select [Panasonic Infrared Port (COM2)] in [Select the port that this infrared device...]. From here on, follow the instructions given on the display followed by pressing [Next].
  • Page 45 Infrared Data Communications Data Communications NOTE Before data communications, please do the following. Add the check mark for [Dial-Up Networking] in [Communications] with [Win- dows Setup] in [Control Panel] - [Add/Remove Programs]. Select [Microsoft] for [Manufacturers:] and [File and printer sharing for Microsoft Networks] for [Network Services:] in [Control Panel] - [Network] - [Add] - [Ser- vice].

  • Page 46: Modem

    Modem Connecting to a telephone line and settings Connecting a telephone line to the internal modem It is not possible to connect the internal modem to any of the following lines. Internal home phones Intercoms CAUTION Do not use the PBX internal phone lines installed in company offices. Doing so may lead to a fire or electric shock.

  • Page 47: Hard Disk Drive

    Hard Disk Drive To change your hard disk drive, contact Panasonic Technical Support CAUTION To customers: To change your hard disk, contact Panasonic Technical Support. Be sure to back up all important data before the change. To technicians (at Panasonic Technical Support): Be careful when replacing the hard disk.

  • Page 48: Setup Utility

    Setup Utility Running the Setup Utility To run the Setup Utility, you Upon seeing press Press <F2> to enter SETUP need to restart your computer. this message NOTE Press F2 while [Press <F2> to enter SETUP] is displayed. The Setup Utility will not run if is not pressed soon after the computer starts.
  • Page 49 Setup Utility Main Menu BIOS Version: Vx.xxLxx System Time: [xx:xx:xx] System Date: [xx/xx/1999] System Memory: xxxxxKB Primary Master: xxxxMB Primary Slave: CD-ROM/DVD-ROM NumLock: [Off] Touch Pad: [Enable] Speaker: [Enable] Display: [External Monitor] Text Expansion: [Disable] Parameters : Default) NumLock Disable Touch Pad Enable Speaker...
  • Page 50 Setup Utility Advanced Menu Plug & Play: [Disable] Serial Port A:* [Auto] Serial Port B:* [Auto] Device: [Touchscreen] Parallel Port:* [Auto] Mode: [Bi-directional] Internal Modem: [Enable] * If [Enable] is set, sub items will be displayed. Parameters : Default) Plug & Play Disable Enable Serial Port A...
  • Page 51 Setup Utility Security Menu Floppy Operation: [Enable] Password on boot: [Enable] Set Supervisor Password: [Enter] User Password Protection: [No Protection] Set User Password: [Enter] CAUTION If starting up the Setup Utility with the User Password; The User Password can only be set when the Supervisor Password has been set and [User Password Protection] has been set to [No Protection].

  • Page 52: Power Management Modes

    Setup Utility Power Menu Power Management Mode : [Enable(Always)] HDD motor timeout: 2 min ECO Mode timeout: 2 min Power Switch:* [Hibernation] Hibernation Timeout: 4 min Panel Switch: [LCD Off] Fn+F7/Fn+F10 key: [Enable] CD-ROM/DVD-ROM Drive Speed : [High] * The [Suspend Timeout] item will be displayed when [Power Switch] is set to [Suspend]. Both [Hibernation Timeout] and [Suspend Timeout] may not be displayed when [Power Switch] is set to [Off].
  • Page 53 Setup Utility Boot Menu 1. [ATAPI Removable] 2. [Hard Disk] 3. [CD-ROM/DVD-ROM] The SuperDisk Drive is included in [ATAPI Removable]. The default order is as follows: [ATAPI Removable] [Hard Disk] [CD-ROM/DVD-ROM]. To move a device up by one in the order, select the device with , and then press F6 .

  • Page 54: Smart Boot

    OFF state, the go-into time to hibernation and the return-to-opera- tion time from the hibernation mode. Select [Start] - [Programs] - [Panasonic] - [Smart Boot] If this box is checked, the following occurs. The Windows Logo display (i.e., the cloud display) is not shown at start-up.

  • Page 55: Technical Information

    Technical Information Network The network connection may be severed when entering the ECO mode and sus- pend (hibernation) mode. Be sure to disable the [Suspend/Hibernation Timeout] settings with the Setup Utility if you require a network environment. When the power saving function is running, communications software may mal- function.

  • Page 56: Dmi Viewer

    CPU and memory. Running DMI Viewer Select [DMI Viewer] from [Start] - [Programs] - [Panasonic]. The screen shown below is displayed. When you click on an item, detailed information on that item will be displayed.

  • Page 57: List Of Error Codes

    If your system displays one of except the messages marked below with an asterisk (*), write down the message and contact Panasonic Technical Support. If your system fails after you make changes in the Setup menus, reset the computer, enter Setup and install Setup defaults or correct the error.
  • Page 58 List of Error Codes 02F5: DMA Test Failed ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers. 02F6: Software NMI Failed ServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt). 02F7: Fail - Safe Timer NMI Failed ServerBIOS2 test error: Fail-Safe Timer takes too long.

  • Page 59: Dealing With Problems (Advanced)

    Dealing With Problems (Advanced) When a problem occurs, please refer to this page. If you still cannot troubleshoot the problem, please contact Panasonic Technical Support. Starting Up The power indicator or Check the cable connection for the AC adapter. battery indicator is not lit Check to see if a fully charged battery is properly installed.
  • Page 60 Dealing With Problems (Advanced) Display At the time of purchase, the display setting is preset for an external display. If you No display after power- connect an external display, the screen is displayed on the external display. ing on When there is no display to an external display, •...
  • Page 61 Check to see if the hard disk is full. If it is full, delete unnecessary files. Your hard disk content may be corrupted. Contact Panasonic Technical Support. When the previous item Try testing another drive or media.
  • Page 62 The sound may continue for a short period of time, but if the computer starts up in a normal manner, then the problem is not serious. If, however, the computer fails to start up, contact Panasonic Technical Support. Timeout Function The timeout functions If the Panasonic Battery Monitor is being displayed, please close it.
  • Page 63 Dealing With Problems (Advanced) Connecting Peripherals Your peripheral does not You need to use drivers conforming to Windows 95 Version 4.00.950B (OSR-2.1). work (An error occurs while Some earlier drivers will no longer work. installing the driver) For more information, please ask the manufacturer of the driver in question. Check the computer-printer connection.
  • Page 64 Pentium is a registered trademark of Intel Corporation. Imation, the Imation Logo, the circle-pyramid logo, SuperDisk and SuperDisk logo are trademarks of Imation Corp. Acrobat is a registered trademark of Adobe Systems Incorporated. Panasonic is a registered trademark of Matsushita Electric Industrial Co., Ltd.

Table of Contents