Panasonic CF-37 Series Reference Manual page 58

Hide thumbs Also See for CF-37 Series:

Table of Contents

Technical Information

When Adding New Software or Hardware Components

Enabling Power Conservation

Precautions When Using a CardBus Type LAN Card

Some of the contents of Service Pack 6 (installed at the time of purchase) may be

overwritten. Therefore, after adding a new software or hardware component, be sure

to install (UPDATE) Service Pack 6. (See the c:\sp6\readme.htm file.)

In addition, if you install Service Pack 6, some files of Phoenix APM 2.0 for Windows NT

and Phoenix Card Executive 2.0 for Windows NT

after installing Service Pack 6, also re-install Phoenix APM 2.0 for Windows NT

Phoenix Card Executive 2.0 for Windows NT

At times you may be prompted to copy Windows NT

copy source and select [OK].

In [Start] - [Run], input [c:\sp6\sp6i386.exe], then press [OK]. Follow the on-screen

instructions.

Windows NT

Confirm that Phoenix APM 2.0 for Windows NT

displayed in [Control Panel], this means that the program is installed.) If the program is

not installed, be sure to install it. (

Prior to usage, optimize the LAN card settings by following the procedure given below.

Failure to do so may result in an error message being displayed when performing a

copy operation via the LAN card with a computer on the network.

Double-click the Network Card you are using from [Network adapters] in [Control

Panel] - [System] - [Hardware] - [Device Manager].

Select [Advanced], choose [Store And Forward] from [Property], and then set [En-

abled] for [Value] if it is set to [Disabled].

(This item may be unavailable for some types of network cards.)

may be overwritten. Therefore,

files. Input [c:\winnt\i386] as the

is installed. (If [APM 2.0 for NT] is

page

25)

Windows 2000

Windows NT

and

Table of Contents