Setting Power Management - Panasonic CF-37 Series Reference Manual

Computing on The Road
CAUTION
When installed in a network environment.
Do not use the standby or hibernation function.
After resuming operation from the standby or hibernation mode, the network con-
nection may be severed or the computer will not work properly.
When a device like a high-speed modem or ISDN terminal adaptor is con-
nected to the serial port, etc.
There are times when high-speed communication is adversely affected if the
power management function is enabled.
Key operation and music playback.
When the power management function is running, you may feel that key or touch
pad (or mouse) operations are sluggish. Furthermore, music may not be played
back correctly when the power of the display is cut (for energy conservation pur-
poses) during playback.

Setting Power Management

1
Run the Setup Utility
2
Using and
3
Using and
Enter
4
Using and
[Enable(Always)] and press Enter
5
Press F10 , then select [Yes]
Windows NT
( page 51)
, select [Power]
, select [Power Management Mode] and press
, select either [Enable(Battery)] or
24