Table of Contents
Advertisement
System PIN
The System PIN is used when changing certain settings and
registration / de-registration. The default setting is 0000. You
can change this to your own preferred number up to 8 digits.
When you enter a PIN the digits are shown as ****.
d
Menu
Settings
1. Press
, scroll
to
and press
d
Set Base
Select
2. Scroll
to
and press
.
d
System PIN
Select
3. Scroll
to
and press
.
4. Enter the old PIN (original setting 0000) and press
OK
5. Enter the new PIN and press
.
OK
6. Re-enter the new PIN and press
.
Back
7. Press
to return to the previous menu level or
to standby.
Restore default settings
You can restore your D11P to its default (original) settings.
It will not affect the phonebook, calls list or user's data,
including personal/recorded outgoing messages.
All handsets registered to the base will be retained. All handset
and base settings will be reset.
d
Menu
Settings
1. Press
, scroll
to
and press
d
Set Base
Select
2. Scroll
to
and press
.
d
Master Reset
Select
3. Scroll
to
and press
.
Yes
No
4. Select
to confirm or
to cancel.
5. Enter the system PIN (original setting 0000) then press
Reset Compete
The display will show
and the unit will restart.
Base settings
Default settings
Handset Name
Handset External Ringtone
Handset Internal Ringtone
Handset Ring Volume
Select
.
Receiver Volume
Key Beep
OK
.
Auto Talk
Screensaver
>
to return
Base Ringtone
Base Ring Volume
Dialling Mode
First Ring
System PIN
ECO Mode
Select
Room Monitor
.
OK
.
ECO mode
To reduce the level of power emissions, you can select low
Handset
power or ECO mode. When the ECO mode is set to
Melody 3
base transmission power will be reduced.
Melody 1
To turn ECO Mode to
3
1. Press
4
2. Scroll
3. Scroll
On
4. Press
On
confirm.
Clock
The display will show
selection together with a confirmation tone.
Melody 1
Signal icon in
3
ECO mode
Tone
Off
0000
Off
Off
When set to
signal icon.
NOTE
When ECO mode is set to
reduced.
On
Off
or
:
d
Menu
Settings
Select
, scroll
to
and press
.
d
Set Base
Select
to
and press
.
d
ECO Mode
Select
to
and press
.
u
d
On
Off
Select
or
to highlight
or
then press
Set to ON
Set to OFF
or
depending on the
ON
,
icon is displayed in place of the standard
ON
, the handset range will be
On
, the
to
13
Advertisement
Table of Contents
