Aastra 6739i User Manual page 165

• Phone - The Phone mode allows you to set the same CFWD configuration for all accounts (All, Busy, and/or No
Answer). When you configure the initial account, the phone applies the configuration to all other accounts. (In the Aas-
tra Web UI, only the account you configured is enabled. All other accounts are grayed out but set to the same configura-
tion.) Using the Aastra Web UI, if you make changes to that initial account, the changes apply to all accounts on the
phone.
• Custom - The Custom mode allows you to configure CFWD for a specific account or all accounts. You can configure a
specific mode (All, Busy, and/or No Answer) for each account independently or all accounts. You can set all the
accounts ON or OFF. Using the IP Phone UI, you can also press the "Copy to all modes" key to copy a phone number to
other phone number fields.
You can enable different CFWD parameters independently (for example, you can set different phone numbers for Busy,
All, and NoAnswer and then turn them on/off individually).
The following table describes the key and Message Waiting Indicator (MWI) LEDs when you enable CFWD on the IP Phone.
Key LED Behavior for All Modes
CFWD key LED RED if any CFWD mode is enabled for the account in focus.
CFWD key LED OFF if all CFWD modes are disabled for the account in focus.
Note:
If you make changes to the configuration for CFWD via the IP Phone UI, you must refresh the Aastra Web UI screen to
see the changes.
Configuring CFWD Mode Using the Aastra Web UI
Use the following procedure to configure the CFWD mode using the Aastra Web UI.
Aastra Web UI
1. Click on Basic Settings->Preferences->General.
41-001317-10 REV03 – 07.2014
MWI LED Behavior for All Modes
MWI LED ON if any CFWD mode is enabled for the account in focus.
MWI LED OFF if all CFWD modes are disabled for the account in
focus.
Managing Calls
159