Intended Use - Duerkopp Adler DACeco M-TYPE Operating Manua

DACeco M-TYPE
Technical information
4.2

Intended use

The DAC is not a motor drive (control unit) that can be used on its own. The control unit is intended to
eco M-TY PE
be fitted into other machines, i.e. sewing units and sewing equipment in the sewing thread processing industry
and trade.
Dry and clean areas must be provided to use the DAC .
eco M-TY PE
Use in wet, dusty or hazardous explosive environments is an infringement of the specified use.
Use for the intended purpose includes observing the manufacturer's prescribed conditions for operation,
maintenance and repair.
0791 100632 EN © 2013 Dürkopp Adler AG
10