Duerkopp Adler DACeco M-TYPE Operating Manua page 20

DACeco M-TYPE
Installation
Keep S1 pressed when
turning on the control unit
Select parameter 5
Push foot pedal forward
until LED S1 and S2 start
flashing
Adjust ref. Position by
handwheel
Keep S1 pressed to confirm
ref.position
Adjust lower position of
needle by handwheel. The
LED2 are flashing. Keep S1
pressed to confirm
Adjust upper position of
needle by handwheel. The
LED1 are flashing. Keep S1
pressed to confirm.
0791 100632 EN
20
Setting the basic functions
© 2013 Dürkopp Adler AG