Software Upload Via Usb - Barco RHDM-1701 User Manual

How to

3.16.3 Software upload via USB

1. Prepare data on USB stick
• Save the new software upload package (xxx.deb) on a USB stick. Place the file in the root and
not in a folder.
:
IMPORTANT
Make sure that the filename starts with 'rhdm' written in lower cases.
2. Software upload
• Place the USB stick in a USB port of the display unit at the back of the display unit.
• The display unit will search for the latest software upload file. The following warning window
appears on the screen
• The display unit will automatically start the software upload after 10 seconds unless the display
unit is powered off or the USB stick is removed. When the display unit is busy with the upload of
the new software, the following warning is shown on the screen:
• When software update has started ("Software update busy") the USB stick can be removed (all
data is already transferred).
70 Barco - RHDM-1701 - User manual