2. System overview
2.6 Digitizer
General
The Digitizer processes (image processing, conversion and conditioning) all source signals for digital distribution to every SLite tile.
The Digitizer may be accessed directly or via the Control Software (e.g. XLite Toolset). This software is designed as a user interface
to be used in conjunction with the Digitizer and Display, this can be used when connected to the Digitizer through a serial RS232
connection. Refer to the Manual of the Digitizer for more information about the Digitizer.
2.7 Control Software
General
The Control Software is designed as a graphic user interface (GUI) and can be used to control and configure the Digitizer as well
as the Barco LED Wall via a PC (e.g. XLite Toolset). Refer to the Manual of the Control Software for more information about the
Control Software.
18
R5976575 FIXED SLITE DISPLAY 17102003