Setting Of The Control Board - LockMaster DSC 600 User Manual

The RED wire of the alarm lamp should be connected into the "7" terminal.
4. Photocell
Use a 2-core cable to connect the "- ~" terminal of the photocell's emitter to the "16" terminal, the "+ ~"
terminal to the "17" terminal. Also the "- ~" and "+ ~" terminals of the photocell's receiver should be
connected to the "16" and "17" terminals in parallel.
Use another 2-core cable to connect the "OUT" terminal of the receiver to the "8" terminal, the "COM"
terminal to the "9" terminal.
5. Push Button
The push button should be wired to the "10" and "11" terminals. The gate opener works alternately by
pushing the button (open-stop-close-stop-open).
6. Loop Detector
First insert the LOOP DETECTOR BOARD into the CONTROL BOARD, and then connect the twisted-pair
to the "14" and "15" terminals.
7. External Receiver
The BROWN wire of the external receiver should be connected into the "11" terminal.
The BLACK wire of the external receiver should be connected into the "16" terminal.
The RED wire of the external receiver should be connected into the "17" terminal.
8. Wired Keypad (24VDC)
The RED wire of the wired keypad should be connected into the "17" terminal.
The BLACK wire of the wired keypad should be connected into the "16" terminal.
The BLUE wire of the wired keypad should be connected into the "10" terminal.
The WHITE wire of the wired keypad should be connected into the "11" terminal.
9. Battery
The negative terminal of the battery should be wired to the "18" terminal.
The positive terminal of the battery should be wired to the "19" terminal.
10. Solar panel
Please refer to the manual instruction of solar panel and controller separated.

Setting Of The Control Board

WARNING: Keep away from the gate during you set the gate opener system in case of the
unexpected gate moving. Carefully adjust the DIP switches to avoid the risk of machine damage and
injury or death. Always ask the help of professional technician /electrician if you have any question.
1. DIP Switches
The DIP switches are used to set the running time of the
motor in pedestrian mode, fine adjust the soft stop period
of the motor, auto close time of the gate opener and
fast change the open/close direction which is
determined by the position of the gate opener installed.
12