Humidifier Performance; Air Tubing - ResMed Lumis 100 VPAP S User Manual

Supplemental oxygen
Maximum flow:
Pneumatic flow path
Design life
Device, power supply unit:
Cleanable humidifier:

Air tubing:

General
The patient is an intended operator.

Humidifier performance

Mask Pressure
cm H O (hPa)
2
3
4
10
20
25
1
AH - Absolute Humidity in mg/L
2
BTPS - Body Temperature Pressure Saturated
Air tubing
Air tubing Material
ClimateLineAir Flexible plastic and electrical components
ClimateLineAir Oxy Flexible plastic and electrical components
SlimLine Flexible plastic
Standard Flexible plastic
3 m Flexible plastic
Heated air tubing temperature cut-out: ≤ 41°C
Notes:
• The manufacturer reserves the right to change these specifications without notice.
• The electrical connector end of the heated air tubing is only compatible with the air outlet at the device end and should
not be fitted to the mask.
• Do not use electrically conductive or antistatic air tubing.
• The temperature and relative humidity settings displayed are not measured values.
Nominal RH output %
Setting 4
85
85
85
85
85
15 L/min (S, ST, T, PAC, CPAP), 4 L/min (iVAPS)
1. Flow sensor
2. Blower
3. Pressure sensor
4. Mask
5. Air tubing
6. Humidifier
7. Device
8. Inlet filter
5 years
2.5 years
6 months
Setting 8
100
100
100
90
90
Nominal system output AH
Setting 4
6
6
6
6
6
Length
2 m
1.9 m
1.8 m
2 m
3 m
1 , BTPS 2
Setting 8
>10
>10
>10
>10
>10
Inner diameter
15 mm
19 mm
15 mm
19 mm
19 mm
English 19