Power Save Mode; Ramp Time - ResMed Lumis 100 VPAP S User Manual

Power save mode

Your Lumis device records your therapy data. In order to allow it to transmit the data to your care
provider, you should not unplug the device. However, you can put it into power save mode to save
electricity.
To enter power save mode:
Press and hold Start/Stop for three seconds.
•
The screen goes black.
To exit power save mode:
• Press Start/Stop once.
The Home screen is displayed.
My Options
Your Lumis device has been set up for your needs by your care provider, but you may find you want
to make small adjustments to make your therapy more comfortable.

Ramp Time

Designed to make the beginning of therapy more comfortable, Ramp Time is the period during
which the pressure increases from a low start pressure to the prescribed treatment pressure.
You can set your Ramp Time to Off or between 5 to 45 minutes.
6
Highlight My Options and press the dial to see your
current settings. From here, you can personalise your
options.
To adjust Ramp Time:
1. In My Options, turn the dial to highlight Ramp
Time and then press the dial.
2. Turn the dial to adjust the ramp time to your
preferred setting and press the dial to save the
change.