Table of Contents
Advertisement
AP Deployment
This chapter explains how to mount and connect the Aruba 2E.
Mounting the Aruba 2E
When provisioning is complete, mount the Aruba 2E at its intended service
location.
The Aruba 2E can be mounted on a wall or suspended from above (not shown)
using one of the optional mounting kits (dimensions vary) in the following ways:
Using the Built-In Mounting Slots
The keyhole-shaped slots on the back of the Aruba 2E can be used to attach the
device upright to an indoor wall or shelf.
C
AUTION
:
Do not use the mounting slots to hang the Aruba 2E from
the ceiling, sideways, or in any place where it could fall on
people or equipment. For more secure installation, use one
of the optional mounting kits.
3
Aruba 2E
11
Installation Guide
Advertisement
Table of Contents
