Radio Card Setup; Entering Data - Datalogic Falcon 4420 48-Key Quick Reference

1.
2.
For more detailed information on making changes to settings, please refer to the PRG.

Radio Card Setup

Windows Zero Config should be used to administer the radio setup. For assis-
tance in configuring the radio card, reference the online help on your Falcon.
Go to

Entering Data

To open an application, tap a link on the
display a list of available programs. Tap a program icon to open it.
There are several ways to enter data with the Falcon:
Quick Reference Guide
• View the contents of configuration profiles, or configs, each of which houses
the RF, security, and other settings for the radio
• Select the config to be used to connect to a WLAN
• View global settings, which apply to every config
• View status information on the radio, the access point (AP) or WLAN router to
which it is connected, and the RF connection or link between the two
• Troubleshoot a connection or performance issue, view in-depth diagnostic
information on the connection and the radio, and perform various trouble-
shooting and diagnostic tests
To launch the utility go to
Tap on the icon.
Wi-Fi
for further information.
> Help
• Use the keypad. Refer to Keypads starting on page 25.
• Use the stylus on the touchscreen display. Refer to Using the Stylus on
page 20 for more information on using the stylus.
• Use the on-screen keyboard by tapping with the stylus. Refer to On-
Screen Keyboard on page 23.
• Select text. Use the stylus to highlight the desired text by dragging the
stylus across the desired text, double-tapping to select one word, and
triple-tapping to select an entire paragraph.
• Use the bar code scanner or imager to enter data. Press the trigger or
scan button (26 or 52-key only) to initiate a scan. The scanned data
will be entered into the current application's open file. Refer to Scan-
ning Bar Codes starting on page
the scanner.
> Settings.
page, or tap
Today
34 for more information on using
Entering Data
to
> Programs
19