Specifications - Fortress Technologies FSAV10M14 User Manual

Stop the air conditioner immediately if one of the following faults occur. Disconnect the
power and contact the service center.
OPERATION indicator or other indicators continue flashing and
it cannot be fixed by restarting the air conditioner.
Fuse blows frequently or circuit breaker trips frequently.
Trouble
Other objects or water penetrate inside the air conditioner.
The remote control does not work or works abnormally.
If one of the following code appears on the display area :
E0,E1,E2,E3.....or P0,P1,P2,P3......
Malfunctions
Cause
Unit does not Power cut
start
Unit unplugged
Fuse may be blown
Battery in the remote control may
be exhausted
The time you have set with the timer
is incorrect
Inappropriate temperature setting
The cooling /
heating efficiency
is not very well
while air flowing
Air filter is blocked
out from the air
Doors or windows are open
conditioner
Air inlet or outlet of indoor or
outdoor unit has been blocked
Compressor 3 minutes
protection has been activated
If the trouble persists, please contact the customer service center.
Be sure to inform them of the detailed malfunctions and the unit model.
Notes: Do not attempt to repair the unit yourself.
Always consult an authorised service provider.

SPECIFICATIONS

BODY DIMENSION(mm)
(W x H x D)
TYPES
INDOOR
750x280x193
FSAV10M14
833x280x195
FSAV13M14
992x310x213
FSAV19M14
Solution
Wait for the power to be restored.
Check if the plug is securely in the wall
receptacle.
Replace the fuse.
Replace the battery.
Wait or cancel the timer setting.
Set the temperature correctly. For
detailed method, please refer to the
Remote Control User Manual .
Clean the air filter.
Close the doors or windows.
Clear obstructions away first, then
restart the unit.
Wait.
WIRING SIZE
(mm ) 2
OUTDOOR
850x545x300 > 3*1.0
>
3*1.0
825x595x310
915x700x360
> 3*1.5
13 13
WARRANTY
1.The product has 2 years warranty from the date of purchase.
2.The warranty shall not apply:
A.to any product subjected to misuse, alteration, act of God, improper handling,
improper transport, improper testing or unauthorized repair;
B.to cosmetic problems or defects which result from normal wear and tear under
ordinary use yet not affecting the performance or use of the product;
C.if the product is disassembled or altered;
D.to any packing, transportation, export / import tax or any related expenses.
3.CUSTOMER MUST PRESENT THE SALES INVOICE OR RECEIPT FOR
2 YEARS WARRANTY SERVICES.
4.All required for service, please contact Fortress Service Centre Hotline,
Tel: 2555 -5788
5.To prevent circuit overload and fire, no more than one adaptor or one extension
unit should be inserted into a socket outlet. (Do not connect other appliances to
the socket outlet supplying an electric heater.) No adaptor should be inserted
into any extension unit or vice versa.
6. Stop using an adaptor or an extension unit or a socket if its socket holes cannot
firmly hold a plug if it is too hard to insert a plug into it.
7. This appliance must be plugged into a specific 220-240V socket with no less than
10A provided. Please make sure the plug is fully plugged-in before use. Do not use
any adapter or extension cord; Never use the same supply socket for this appliance
and other appliances at the same time, in order to avoid damage to this appliance.
8. THE APPLIANCE IS FOR HOUSEHOLD USE ONLY.
ENVIRONMENT
Do not throw away the appliance with the normal household waste at the
end of its life, but hand it in at an official collection point for recycling.
By doing this, you help preserving the environment.
IMPORTANT NOTICES
IN NO EVENT SHALL OUR COMPANY OR THE SUPPLIER BE LIABLE TO YOU OR
ANY OTHER PARTY FOR ANY DIRECT, INDIRECT, GENERAL SPECIAL,
INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR OTHER DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PRODUCT (INCLUDING, WITHOUT
LIMITATION, DAMAGES FOR INJURY, LOSS OF PROPERTY, BUSINESS PROFITS,
BUSINESS INTERRUPTION) OR FROM ANY BREACH OF WARRANTY, EVEN IF
OUR COMPANY OR SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN NO CASE SHALL OUR COMPANY OR SUPPLIER'S LIABILITY
EXCEED THE AMOUNT YOU PAID FOR THE PRODUCT.
Specifications, designs and dimensions are subject to change without prior notice.
14 14