Stop The Tractor; Stopping Procedure; Stop In An Emergency - Yanmar Lx410 Operator's Manual

4. Stop the Tractor

■ Stopping Procedure

1. Make sure both brake pedals are securely
connected using the brake pedal connector lock
(F).
2. Push down Power Take Off (PTO) switch (B) to
OFF position.
3. Slow down the engine.
4. Depress the clutch pedal (E).
5. Depress both brake pedals (G) to stop the tractor.
! WARNING
Avoid injury!
● Make sure that the clutch pedal is depressed
fully.
6. Move the following levers to the N (neutral)
position:
• Primary gear lever (D)
• Range gear lever (C)
• Forward/N/reverse lever (A)
(A)
(E)
(D)
(C)
P5-3 top view_2
(A) Forward/N/reverse lever
(B) Power Take Off (PTO) switch
(C) Range gear lever
(D) Primary gear lever
(E) Clutch pedal
40 IMG 4473b
(F) Brake pedal connector lock
(G) Brake pedals
Lx410/450/490 Operator's Manual
8. OPERATE THE TRACTOR
7. Push the 3-point hitch control lever forward to
lower any implements to the ground.
● To prevent injury or property damage:
• always lock the parking brake when the
• whether the engine is running or stopped
• the tractor wheels are free to move when the
8. Engage the parking brake securely, for details,
see "6. Lock and Set the Parking Brake" on page
7-4.
9. Turn the starter key switch to OFF position.

■ Stop in an Emergency

1. Depress the clutch pedal.
2. Depress both brake pedals to stop the tractor.
3. Turn the starter key switch to OFF position.
4. Do not release the clutch pedal until the engine
and all moving parts have completely stopped.
5. If possible, lock the parking brake securely.
(B)
(F)
(G)
8-11
! WARNING
following levers are in N (neutral) position:
• primary gear lever
• range gear lever
• forward/N/reverse lever
levers are in the N (neutral) position