Yanmar Lx410 Operator's Manual page 120

3. Power Take Off (PTO)/Parking Brake
Interface
1. Sit on the operator seat.
2. Move counterclockwise the brake pedal
connector lock to lock together the left and right
brake pedals.
3. Engage the parking brake securely, for details,
see "6. Lock and Set the Parking Brake" on page
7-4.
4. Push down Power Take Off (PTO) switch to OFF
position.
5. Move the following levers to the N (neutral)
position:
• Primary gear lever
• Range gear lever
• Forward/N/reverse lever
6. Turn the starter key switch to START position.
7. Pull up Power Take Off (PTO) switch to ON
position.
8. Slightly rise up from the operator seat to remove
weight from the operator seat.
IMPORTANT
● Do not dismount from the tractor.
9. Confirm that Power Take Off (PTO) continues to
operate.
10.Sit on the operator seat.
11.Disengage the parking brake.
12.Slightly rise up from the operator seat to remove
weight from the operator seat.
IMPORTANT
● Do not dismount from the tractor.
13.Make sure that the engine is shut down.
14.Push down Power Take Off (PTO) switch to OFF
position.
15.Turn the starter key switch to OFF position.
Lx410/450/490 Operator's Manual
14. PERIODIC SERVICE
(A)
14-13_PTO_SW_3
(A) Power Take Off (PTO) switch
IMG_4479 2
(B) Range gear lever
14-13
(B)