Yanmar Lx410 Operator's Manual page 125

(B)
450140516 R
(B) Front axle pivot pin grease fitting (rear)
NOTE
● The grease fitting of the front axle pivot pin is
located below the front platform on the tractor.
3. Lubricate the Grease Fittings on the
Brake and the Parking Brake Linkage
Extremely Wet or Muddy Conditions
Lubricate the grease fittings once every 10 operating
hours or once a day.
All Other Conditions
Lubricate the grease fittings once every 50 operating
hours.
4. Lubricate the Operator Seat Slide
Rails
Lubricate the operator seat slide rails with SUPER
®
LUBE lubricants once every 50 operating hours.
®
SUPER LUBE is a registered trademark of Synco
®
Chemical Corp .
1. Move the operator seat forward.
2. Lubricate the rear part of the operator seat slide
rails with SUPER LUBE
3. Move the operator seat backward.
4. Lubricate the front part of the operator seat slide
rails.
14. PERIODIC SERVICE
®
lubricants.
14-19_seat slide rails
(A) Operator seat slide rails
5. Lubricate the 3-Point Hitch
Lubricate the ball joints with SUPER LUBE
lubricants once every 50 operating hours.
®
SUPER LUBE is a registered trademark of Synco
®
Chemical Corp .
38 P1080928
(A) Ball joints
(B) Lube fitting
14-18
Lx410/450/490 Operator's Manual
(A)
®
(A)
(B)
(A)