Yanmar Lx410 Operator's Manual page 54

(B)
45007017
(B) Power Take Off (PTO) switch
5. Push the 3-point hitch control lever forward to
lower any attached implements to the ground.
6. The preceding action prevents the tractor from
suddenly rearing up during the starting of the
engine.
(a)
3P_hitch_lever_3
(A) 3-point hitch control lever
(a) Lowest position
(b) Highest position
NOTE
● If the tractor is equipped with the implement
control valve, use the implement control lever to
lower any attached implements to the ground.
(b)
(a)
450_009_ICLever2
(A) Implement control lever
(a) Lower the implement
(b) In levelled position
Lx410/450/490 Operator's Manual
7. OPERATE THE ENGINE
(A)
(b)
(A)
7-5
7. Push the throttle control lever forward from the
slow idle position to the 1/3 to 1/2 fast positions.
15 IMG_4500
(A) Throttle control lever
(a) To increase the engine speed, push the throttle
control lever forward.
(b) To decrease the engine speed, pull the throttle
control lever backward.
8. Insert the Key into the Starter Key
Switch and Turn the Key to the ON
Position
OFF position:
The engine does not run.
ON position:
The engine oil pressure warning light and the
alternator/battery charging light illuminates. The glow
plugs indicator light illuminates for 15 seconds, for
Lx410/450 models. Air heater indicator light
illuminates for 15 seconds for Lx490 model.
START position:
● The starter turns the flywheel to run the engine.
● The engine begins to run.
● Once the engine is running, release the starter key
switch.
(A)
450070118 Starter
(A) OFF position
(B) ON position
(C) START position
(A)
(a)
(b)
(B)
(C)