Operating The Tractor - Yanmar YM195 Operation Manual

Operating the tractor
31
(3) Travel speeds
Travel speeds for YM195 tractor areshown below.
Speeds for tractor with 8.318-24 rear tires.
Speeds would be 5.4% faster with 9.519-24 tires
and 1% slower with 13.6-16 turf tires.
YM1951195D TRACTOR SPEEDS
Travel speeds for YM240 tractor are shown below.
Speeds for a tractor with 9.519-24 rear tires.
Speeds would be 4.3% faster with 11.2110-24
tiresand 9.2% slower with 13.6-16 turf tires.
YM2401240D TRACTOR SPEEDS
(4)
Clutch
A clutch is used to connect or disconnect engine
power t o the transmission and drive wheels. The
clutch is used to facilitate the shifting of gears.
It
is also used to allow the engine t o operate,
when the tractor is stopped, without placing the
shift levers i n neutral (out of gear).
When disengaging, depress the clutch quickly, and
when engaging, release it slowly.
-
Do not rest your foot on the clutch pedal.
Especially, when using tractor with front loader,
dozer, rear blade or box scraper, check pedal free
travel often.
(See page 60.)
(5) Brakes
Brake pedals must be connected together b y means
of connector when driving on public roads.
Keep
brake pedals adjusted evenly, t o prevent
tractor from swerving t o one side when both
brakes are applied.
See
page 61.
The tractor is equipped with individual operating
brakes. T o stop tractor, depress both brake pedals
connected by brake connector.
Use individual brakes to assist in rna!<ing sharp
turns. Disconnect connector and depress only one
brake pedal.
To prevent unnecessary wear, never ride thebrakes
by resting a foot on the pedals.