Firenzo CONTESSA Installation And Operation Manual
  1. Manuals
  2. Brands
  3. Firenzo Manuals
  4. Wood stove
  5. CONTESSA
  6. Installation and operation manual

Firenzo CONTESSA Installation And Operation Manual

Freestanding clean air woodburner
Hide thumbs Also See for CONTESSA:

Advertisement

Table of Contents

See also: Instructions for Using , Instruction and Installation Manual
Please read this booklet and keep for future reference for the safe installation
and operation of your:
CONTESSA
Freestanding Clean Air Woodburner
All installations must be in accordance with these instructions. Consult with
the building authority having jurisdiction to determine the need for a permit
prior to commencing the installation. Failure to follow these instructions may
also void your home insurance and warranty.
Please leave this manual with the owner when installation is
complete.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CONTESSA and is the answer not in the manual?

Questions and answers

Wanda Jones
March 8, 2025

How do I remove the side please

User image 67cbde3615019
0

Related Manuals for Firenzo CONTESSA

Summary of Contents for Firenzo CONTESSA

  • Page 1 Please read this booklet and keep for future reference for the safe installation and operation of your: CONTESSA Freestanding Clean Air Woodburner All installations must be in accordance with these instructions. Consult with the building authority having jurisdiction to determine the need for a permit prior to commencing the installation.
  • Page 2 Assembly Instructions Fitting Seismic Restraints Flue Installation Minimum Height of Flue Exit 9/11 Operating Instructions Door Glass Cast Iron Tops Maintenance Safety 13/14 Warranty Distributed by: FIRENZO AUSTRALIA PTY PO Box 4431, Dandenong South, Victoria 3164 Email: firenzo@firenzo.com.au Contessa Guide 16/05/2013...
  • Page 3 1. WARNINGS THIS APPLIANCE SHOULD BE MAINTAINED AND OPERATED AT ALL TIMES IN ACCORDANCE WITH THESE INSTRUCTIONS. The Contessa is tested to Australian and New Zealand Standards AS/NZS 2918:2001. INCORRECT INSTALLATION OF THIS APPLIANCE MAY RESULT IN OVERHEATING OF HEAT SENSITIVE MATERIALS AND POSSIBLE FIRE.

  • Page 4: Installation Responsibilities

    The leg base must be anchored to both the floor protector and the floor for seismic restraint. Anchor points are provided on the rear legs. Contessa Guide 16/05/2013...

  • Page 5: Installation Clearances

    CLEARANCES 1320 1140 Measurements are from the edge of the top castings. If the heater is to be placed on or within 500mm of a heat sensitive floor an insulated floor protector will be required (page 4). Contessa Guide 16/05/2013...

  • Page 6: Assembly Instructions

    12. Fit the control knob - place the flat on the knob to the flat on the air control shaft situated on the right handside of the fire. Press home firmly. FITTING SEISMIC RESTRAINT BRACKETS ON CONTESSA 1. Place firebox with leg assembly on the floor protector and locate as per appropriate clearances.
  • Page 7 Where such action is considered the manufacturer should be consulted in the first instance. WARNING: The appliance and flue system shall be installed in accordance with AS/NZS 2918:2001 and the appropriate requirements of the relevant building code or codes. Contessa Guide 16/05/2013...
  • Page 8 Contessa Guide 16/05/2013...

  • Page 9: Operating Instructions

    WARNING: IT IS NECESSARY TO MOVE BOTH AIR CONTROLS TO ‘HI’ BEFORE OPENING THE DOOR. Never open the door when a vigorous fire is in progress. Wait until the flames have subsided and the fire is stable. Reload with dry logs. Contessa Guide 16/05/2013...

  • Page 10: Storage Of Fuel

    Remember, you only get out of any heater what you put into it. The better the fuel, the better the heater. STORAGE OF FUEL WARNING: DO NOT STORE FUEL WITHIN HEATER INSTALLATION CLEARANCES. Contessa Guide 16/05/2013...

  • Page 11: Flammable Liquids

    Insulating material including all seals for the glass need to be replaced at this time also. Without the insulation seal tape in place, the glass is likely to shatter. Your Firenzo agent will be able to supply and install any spare parts.

  • Page 12: Maintenance

    Once cleaning has been completed replace the baffle bricks. The front of the baffle bricks placed on top of the air tube in the top chamber and the back of the bricks are Contessa Guide 16/05/2013...

  • Page 13: Warranty

    Do not clean when the fire is in use. 11. SAFETY All surfaces on the Contessa will get hot and cause burning if touched. We recommend using a fireguard. The flue must be cleaned regularly (see page 14) to avoid flue fires.
  • Page 14 Firenzo Australia Pty or its accredited agents. d) This warranty does not apply and Firenzo Australia Pty shall have no obligation in respect to any heater part or accessory which has: 1.
  • Page 15 Contessa Guide 16/05/2013...
  • Page 16 Contessa Guide 16/05/2013...

Table of Contents

Save PDF