Page 1
Please read this booklet and keep for future reference for the safe installation of your: Viking ru MODEL MODEL MODEL MODEL FREESTANDING WOODBURNER THIS FIRE CAN BE INSTALLED ON A PROPERTY OF 2 HECTARES OR MORE All installations must be in accordance with these instructions.
Page 2
Please complete and return your warranty registration card which is enclosed. INDEX Page No: Item No: Topic: Warnings Installation Responsibilities Floor Protector Requirements Installation Clearances Assembly Instructions Flue Installation Minimum Height of Flue System Exit Please leave these instructions with owner when installation is complete. Edited 22/3/13 Viking RU Dry...
Page 3
EFFECTS ON REFACTORY LINING IN SOLID FUEL APPLIANCES. EMISSION OF POISONOUS GASES CAN ALSO BE EXPERIENCED WITH THE BURNING OF TREATED WOOD. Driftwood with salt content will also cause rapid deterioration of the heater and should not be used. Viking RU Dry...
All joints shall be fixed to prevent accidental separation, and shall be sealed to prevent any spilt ash or embers contacting any heat sensitive material. Viking RU Dry...
4. INSTALLATION CLEARANCES Firebox Size: Height 340mm Width 320mm Depth 500mm Flue Size: 150mm Heating Area estimate 200sqm CLEARANCES WITH FLUE 1040 1280 1060 SHIELD Clearances are shown with an ash floor protector using 6mm ceramic tiles Viking RU Dry...
Page 6
Slide in the rear infill top plate behind the flue and the curved top plate locates into the lugs onto the back edge. 9. Fit door knob with spacer as per drawing shown herewith. - Viking RU Dry...
Page 7
Where such action is considered the manufacturer should be consulted in the first instance. WARNING: The appliance and flue system shall be installed in accordance with AS/NZS 2918:2001 and the appropriate requirements of the relevant building code or codes. Viking RU Dry...
Need help?
Do you have a question about the Viking Ru Dry and is the answer not in the manual?
Questions and answers