Checks to make before calling your fitter :
•
The burner will not start
This may be caused by :
Shutdown by the safety thermostat due to accidental
overheating. To restart the boiler : Press the resetting button of
. Call your fitter nonetheless.
the burner
Shutdown of the safety system in connection with flue gas
evacuation. To restart the boiler : Press the resetting button of
the burner
. If interruptions of this kind happen repeatedly,
contact your fitter. It is possible that the combustion products
evacuation pipe is totally or partially obstructed.
•
The burner is operating but the radiators are cold
Bleed the radiators
Top up the primary circuit with water
Check that the heating pump is operating correctly
Call your fitter nonetheless
•
When you inform your fitter of an error, tell him :
Product type,
Serial number : This information can be found on the rating
plate stuck to the inside of the control panel flap,
Type of gas used (Natural gas or Propane)
8
Troubleshooting
INNOVENS - MC 35E / MC 45 / MC 65 / MC 90
300005222-001-A
21/03/05 -