Fluke 116 User Manual page 23

Function
AC μAmps True-rms
[1]
(45 Hz to 1 kHz)
DC μAmps
[3]
Hz (V input)
Notes:
[1] All AC ranges except Auto-V LoZ are specified from 1 % to 100% of range. Auto-V LoZ is specified from 0 V.
Because inputs below 1 % of range are not specified, it is normal for this and other true-rms meters to display non-
zero readings when the test leads are disconnected from a circuit or are shorted together. For volts and μA, crest
factor of ≤3 at 4000 counts, decreasing linearly to 1.5 at full scale. AC volts is ac-coupled. Auto-V LoZ, AC mV, and
AC μA are dc-coupled.
[2] Temperature uncertainty (accuracy) does not include the error of the thermocouple probe.
[3] Frequency is ac coupled and specified from 5 Hz to 50 kHz.
Shop for Fluke products online at:
Table 1 Accuracy Specifications (cont.)
Range
600.0 μA 0.1 μA
600.0 μA 0.1 μA
99.99 Hz 0.01 Hz
999.9 Hz 0.1 Hz
9.999 kHz 0.001 kHz
50.00 kHz 0.01 kHz
MyFlukeStore
www.
Resolution
± ([% of Reading] + [Counts])
1.877.766.5412
.com
True-rms Multimeter
General Specifications
Accuracy
1.5 % + 3
(2.5 % + 3 >500 Hz)
1.0 % + 2
0.1 % + 2
21