Kenmore 405.54530 Use & Care Manual page 12

o Remove the rubber plug from the back
drain outlet of the unit and set aside.
Remove bucket, and insert the drain tube
through the drain outlet on the backof the
unit. Securely press the end of the tube onto
the internal connector on the inside of the
unit(See Fig. 9).
• Use the two supplied screws to screw adaptor
A to the back of the unit.
• Screw the female threaded end of the garden
hose onto adaptor A (see Fig. 10). Lead the
hose to a floor drain.
Make sure the hose is secure so there are no
leaks.
• Direct the hose toward the drain, making sure
that there are no kinks that will stop the
water flowing.
Place the end of the hose into the drain and
make sure the end of the hose is level or below
the drain outlet on the unit. Never let the hose
run upwards.
• Place the bucket back in the unit and make sure
that it is correctly in place.
• Continuous draining will begin once the the unit
begins operation.
Drain tube
Figure 8
Drain tube
Figure 9
Garden hose
threaded end
Figure 10
12