When Using The Unit - Kenmore 405.54530 Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

Withtheunit o ff _ , p ress t heTimer b utton, andtheOnlightindicates thattheAuto
Start f unction m ay beprogrammed. Within 5 seconds press t heUP or DOWN
buttons t oselect a period oftimeafterwhich operation w ill
start. Press the Timer
button twice and the Off light indicates that the Auto Stop function may be pro-
grammed.
Within 5 seconds press the UP or DOWN
button to select a period
of
time after which operation
will stop.
Press or hold the UP or DOWN
button to change the Auto time by 0.5 hour
increments, up to 10 hours, then at 1 hour increments up to 24 hours. The control
will count down the time remaining until start or stop.
• The selected time will register for 5 seconds and the system will automatically
revert back to display the previous humidity setting.
" When the Auto start & Auto stop times are set within the same program
sequence, TIMER ON OFF indicator lights illuminate, identifying that both
ON and OFF times are now programmed.
• Turning the unit ON or OFF at any time or adjusting the timer setting to 0.0 will
cancel the Auto Start/Stop
function.
° The Auto Start/Stop
function will also be cancelled
when the protection
code
P2 (bucket full) appears in the control panel display window.
WHEN
USING
THE UNIT
* This unit is designed to operate with a working
environment
between
41°F/5C ° and 95°F/35C °.
* 3 minute compressor delay - Any time the compressor stops running for any
reason, such as when the humidity set point has been reached,
it will not
restart again for a minimum of 3 minutes. This is a safety design to prolong the
life of the compressor. If the fan has also stopped,
it will not restart again
for
3 minutes or until the compressor
starts.
* Do not connect the dehumidifier
to a multiple socket outlet that is also being
used for other electrical
appliances.
* Select a suitable location, making sure you have easy access to an electrical outlet.
o Plug the unit into a electrical
socket-outlet
with a ground connection.
Make sure the water bucket is correctly fitted; otherwise the unit will not
operate properly.
NOTE: Be careful to avoid tipping the unit over while moving it when there is water
in the bucket.
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

405.54550405.54570

Table of Contents