Using The Built-In Flash - Canon EOS Rebel XS Instruction Manual

Hide thumbs Also See for EOS Rebel XS:
Table of Contents

Advertisement

Using the Built-in Flash
_;_ Shoot_ng Tips
if the subject
is fat away, increase the }SO speed=
By increasing the [SO speed, you can extend the flash range
in bright
light, decrease
the ISO speed,
If the exposure setting in the viewfinder
blinks, decrease the ISO
speed.
Detach the tens hood and keep at least f meter/3.3
feet away
from the subject.
if the lens hood is attached or if you are too close to the subject, the
bottom portion of the picture might turn out dark
For important
shots, check the image on the LCD monitor to make sure the flash
exposure looks good (not dark at the bottom)
Using Red:eye
Reduction
Using the red-eye reduction lamp before taking a flash picture can
reduce red eye Red-eye reduction wifi work in any shooting mode
except <i_>
<_>
<OK,>
_ Under the [_'] tab, select [Red-eye
OnlOft], then press <8>
Select
[On], then press <8>
_ For flash photography, when you
press the shutter button halfway, the
red-eye reduction lamp will light.
Then when you press the shutter
button completely, the picture will be
taken.
_¢ The red-eye reduction feature is most effective when the subject looks at
the red-eye reduction
lSr@, when the rpQm is well !!t, b_ when you go
closer to the subject.
_, When you press the shutter button halfway, the viewfinder display on the
bottom vdH graduafly turn off. F£r best results, take th e hlictu[e
afterth!#
display turns off.
_ The effectiveness
of red-eye reduction varies from subject to subject.
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eos 1000d

Table of Contents