Program Ae; Changing The Iso Speed - Canon EOS Rebel XS Instruction Manual

P: Program AE zz z Jz szJ/zys
To obtain a good exposure of the subject, the camera sets the exposure
(shutter speed and aperture) automatically This is called Program AE.
Set the _4ode Dial to <P>.
'_ Take the picture.
_, Press the shutter button halfway and
the camera will focus
_, The exposure setting (shutter speed
and aperture) set automatically is
displayed in the viewfinder
_, Press the shutter button completely
_1_ Shooting T_ps
Changing the ISO speed and using the buHt4r_ flash_
To match the subject and lighting level, you can change the ISO
speed (p57) or use the buiitdn flash (p58) In the <P> mode, the
built-in flash will not fire automatically. So under low light, press the
<_> (Flash) button to pop-up the flash.
The program can be shifted. (Program shift)
After pressing the shutter button halfway, turn the <y_z_> dial to
change the shutter speed and aperture setting combination
(program) After you take the picture, the program shift will be
canceled. Program shift is not possible with flash.
aperture display will blink when you press the shutter
button halfway, as shown in the figure. In lOW light (30"
;_.5),either increase the _SOspeed (p.57) or use flash
(p.58). In bright light (4000 22), decrease the ISO speed.
56