Silent Burglary Alarms; Silent Emergency Alarms; Disabling Quick Arming; Automatic Restoral Of Bypassed Sensors - Linear DVS-1200 Installation & Programming Instructions

SILENT BURGLARY ALARMS

✦ The factory setting causes audible burglary alarms.
STEP #63 The Console can be programmed for silent burglary
alarms using this step.

SILENT EMERGENCY ALARMS

✦ The factory setting causes audible emergency
alarms.
STEP #64 The Console can be programmed for silent
emergency alarms using this step.

DISABLING QUICK ARMING

✦ The factory setting allows quick arming of the
Console by pressing down the mode keys for two
seconds.
STEP #65 The Console can be programmed to not allow quick
arming using this step. If quick arming is disabled,
a user code must be entered before pressing the
mode buttons.
✎ NOTE: For commercial installations with retail
traffi c, it is recommended to disable quick arming
to prevent customers from arming the system.
✎ NOTE: If quick arming is disabled the Home Instant
Mode is unavailable.

AUTOMATIC RESTORAL OF BYPASSED SENSORS

✦ Bypassed sensors are ignored by the Console and
cannot cause an alarm.
✦ The factory setting causes the Console to
automatically restore (remove the bypass from)
sensors that close. After it's restored, the sensor is
ready to cause an alarm the next time it is opened.
STEP #66 The Console can be programmed to not
automatically restore any bypassed sensor when
the sensor closes using this step. Bypassed
sensors will then remain bypassed until the system
is disarmed.
✎ NOTE: This setting affects all sensors.

AUTOMATIC BYPASSING OF OPEN SENSORS

✦ The factory setting requires the user to manually
bypass any open sensors when the system is
armed.
✴ If arming is attempted with open sensors, the Console will
sound fi ve two-tone Beeps and will not arm.
✦ Arming to the same mode again within fi ve seconds
will bypass any open sensors and arm the Console.
STEP #67 The Console can be programmed to automatically
bypass any open sensors when the system is
armed using this step.
✎ NOTE: This setting affects all sensors.
28
6
MNO
PROGRAMMING STEP #63
3
DEF
PROGRAM
HOME
0 FOR AUDIBLE BURG
1 FOR SILENT BURG
AWAY STORE PROGRAM
6
MNO
PROGRAMMING STEP #64
4
GHI
PROGRAM
HOME
0 FOR AUDIBLE EMERGENCY
1 FOR SILENT EMERGENCY
AWAY STORE PROGRAM
6
MNO
PROGRAMMING STEP #65
5
JKL
PROGRAM
HOME
0 FOR QUICK ARMING OFF
1 FOR QUICK ARMING ON
AWAY STORE PROGRAM
6
MNO
PROGRAMMING STEP #66
6
MNO
PROGRAM
HOME
0 FOR AUTO RESTORAL OFF
1 FOR AUTO RESTORAL ON
STORE PROGRAM
AWAY
6
MNO
PROGRAMMING STEP #67
7
PRS
PROGRAM
HOME
0 FOR AUTO BYPASS OFF
1 FOR AUTO BYPASS ON
AWAY STORE PROGRAM