Reinstalling The Sprint Pcs Connection Card Driver; Windows 2000 - Novatel Merlin S620 User Manual

Reinstalling the Sprint PCS Connection Card Driver

There is a Sprint PCS Connection Card driver for each supported
Windows operating system. Unless the appropriate driver for your
version of Windows is installed, you will not be able to establish a
network connection with the card. This section provides instructions on
verifying that you have the correct card driver installed.
Note:
You must have the Sprint PCS Connection Card installation CD to
complete this procedure.
Windows
To verify that the correct driver is installed:
1.
Locate the existing driver.
2.
Update the driver.
To locate the driver:
1.
Close all Windows programs and open the Control Panel by selecting
Start > Settings > Control Panel.
2.
Double-click the System icon.
3.
Click the Hardware tab.
4.
Click the Device Manager tab.
5.
Locate the Sprint PCS Connection Card entries by using the "+" signs to
expand the listings. (For example, to see all the installed modems, click
the "+" sign to the left ofModems.) The card should have three entries:
The card should display under Multifunction adapters as
Sprint Meriln S620 Modem Parent.
The card should display under Modems as Sprint Merlin S620 Modem.
The card should display under Network adapters as Sprint Merlin
S620 Modem Adapter.
If the listings above do not appear, identify the listing for the
Sprint PCS Connection Card by ejecting the card. This causes the
driver listing for the card to disappear from the list. Reinsert the
card again to cause the driver listing to reappear. You can identify
the entries for the Sprint PCS Connection Card by observing which
entries are affected when you eject and reinsert the card.
2D: Troubleshooting Tips
2000
®
44