Getting Started - Novatel Merlin S620 User Manual

Getting Started

Before you can use your new Sprint PCS Connection Card, you
must first:
1.
Install the Sprint PCS Connection Manager
the installation CD, onto your computer.
Note:
Before installing your new software, delete or uninstall any previously
existing modem or dialer software from your system.
Do not insert the Sprint PCS Connection Card into the slot until you have
installed the Sprint PCS Connection Manager Software onto your PC or
until instructed to do so by the installation CD.
2.
Insert the card into your computer's PC Card slot (Sprint label facing
up). Windows will detect the card and automatically install the
necessary card drivers.
Note:
A driver is software that forms the interface between a device (such as the
Sprint PCS Connection Card) and the operating system on your PC.
3.
Launch the Sprint PCS Connection Manager Software application.
4.
Activate your Sprint PCS Connection Card and Account, unless it was
pre-activated. If your card has not previously been activated, the
Activation Wizard will automatically launch and guide you through
the process.
2A: Installing the Sprint PCS Connection Card
Software, located on
SM
12