Table of Contents
Advertisement
8.4
FITTING THE DECORATIVE FRAME ASSEMBLY
FL05 Models :
Remove the decorative frame assembly
from any protective packaging, and remove
any protective film that may be present on
the frame.
The frame is hung onto the firebox via the
two upper hanging brackets and then
secured to the firebox via the two lower
knurled fixing bolts, which are inserted
through the holes in the lower frame
mounting brackets after the frame is in
position. See diagrams to the right and
below.
FL06 Models :
Remove the glass facia panel from any pro-
tective packaging. The glass facia panel is
supported by four M6 screws which pro-
trude from the front of the outer casing.
Ensure each screw is unscrewed approxi-
mately one turn from the fully screwed in
position in order to create a 2mm gap
(shown).
Simply hang the facia panel onto the outer
casing ensuring that the corresponding
keyhole shaped holes engage the screw-
heads fully.
9.0
BRIEFING THE
CUSTOMER
All instructions must be handed to the user
for safekeeping. Show the customer how to
light and control the fire. After commis-
sioning the appliance, the customer should
be instructed on the safe use of the appliance and the need for regular servicing. Frequency of service
depends on usage, but MUST be carried out at least once annually.
Advise that cleaning of the fire maybe achieved when the fire is cold using a damp cloth and mild deter-
gent on most surfaces. Advise that the fire will emit a "newness" smell for a time after initial commission-
ing and that extra ventilation may be needed during this time. Recommend that a guard be used for the
protection of the young, pets, the elderly and the infirm
7 7
FL05 Models
FL06 Models
Advertisement
Table of Contents
