Download Print this page

Monte Carlo Fan Company 5RDR Series Owner's Manual

Hide thumbs Also See for 5RDR Series:

Advertisement

Owner's
Manual
Ceiling Fan Installation Instructions
For 5RDR Series Fans
BLADES NOT INCLUDED
READ AND SAVE THESE INSTRUCTIONS
Total fan
weight

Advertisement

loading

Summary of Contents for Monte Carlo Fan Company 5RDR Series

  • Page 1 Owner’s Manual Ceiling Fan Installation Instructions For 5RDR Series Fans BLADES NOT INCLUDED READ AND SAVE THESE INSTRUCTIONS Total fan weight...
  • Page 2: Installation

    Installation AFETY WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70- 1999), including fire-rated construction.
  • Page 3 Lower upper glass disk onto fan housing and Secure mounting neck to the mounting plate Lift mounting neck to mounting Plate and align align 3 holes in glass with 3 holes in fan hous- with 6 screws to become a complete mounting screws.
  • Page 4 Tighen all 6 screws for arch arms Install arch mount by using clips in Tighen the 3 screws holding the arch securely. plastic bag. Place clip through tab arms securely. and fasten securely. Push the yoke cover down into Plug in electrical connections there Install 6 x 15 watt candelabra tor- place.
  • Page 5 House white white black black orange blue Green Make wiring connections as indicated above. White from fan to white from remote marked Make wire connections to power source using N. Orange from fan to Orange from remote wire nuts provided. Make sure that no filiments marked Light/up.
  • Page 6: Fan Speed

    Remote Control Transmitter Features: FAN REVERSE LED LIGHT (Press once to change direction of MEDIUM SPEED the fan)Fanmust be running to reverse. LOW SPEED HIGH SPEED FAN OFF SETTING UPLIGHT ON/OFF SET- (Turns fan off only) TING AND DIMMER (Press and hold to dim light infinitively) DOWNLIGHT ON/OFF SETTING AND DIMMER...
  • Page 7: Troubleshooting

    Trouble Shooting If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, or you are experiencing difficulty in installation, please call our Customer Service Center at the number printed on your parts list insert sheet.