Summary of Contents for Monte Carlo Fan Company 5RH52 Series
Page 1
’ WNER ANUAL Ceiling Fan Installation Instructions Total fan weight with light For 5RH52 Series Fans READ AND SAVE THESE INSTRUCTIONS UALITY EILING FANS...
Attach the mounting bracket using only the hardware supplied with the outlet box. To reduce the risk of fire or electric shock, do not use this fan with any solid state fan speed control device, or variable speed control. The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation. Follow the heat- ing equipment manufacturer’s guideline safety standards such as those published by the National Fire Protection Association (NFPA),...
Page 3
White White Green Ground Connect black and blue wire from fan to Black or (Hot) wire from house. Connect White wire from Fan to White (Neutral) wire from house. Connect Ground leads from mounting bracket and downrod to Ground lead from house. Refer to Safety Tips section of manual.
Page 4
1 screw. Save removed screw for use later. Connect white wire from fan to white wire from light fixture. Then plug blue wire from fan to black wire from light fixture. Attach glass to light fixture. Install by twisting clockwise, add 1 screw removed step 20 to light kit plate.
Page 5
Install decorative finial nut to glass to secure in place.
Page 6
If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart.