Monte Carlo Fan Company 5RDR Series Owner's Manual page 5

31
Fan
white
black
orange
blue
Green
Make wiring connections as indicated above.
White from fan to white from remote marked
N. Orange from fan to Orange from remote
marked Light/up. Blue from fan to blue from
remote marked down light. Black from fan to
Black from remote marked L. White from
house to white from remote marked AC N .
Black from house to Black from remote
marked AC L. Connect all green ground wires
to Ground wire from House.
34
Attach blade brackets to blades using
the blade bracket screws and wash-
ers provided.
HIGH SPEED
37
Plug 9 pin wire connections together.
40 HAND HELD INSTALL
Place face plate over battery compartment and
buttons. Place remote over 2 pins on front
cover. Attach cover of remote by placing over 4
pins and snaping into place.
32
House
white
black
Make wire connections to power source using
wire nuts provided. Make sure that no filiments
are outside of the wirenut. After making the
wire connections, the wires should be spread
apart with the grounded conductor and the
equipment-grounding conductor on one side of
the outlet box and ungrounded conductor on
the other side of the outlet box.
35
Install all 5 fan blade assemblies to
the motor as shown above. Tighten
screws securely.
38
Attach switch housing to fan using
the three screws provided.
41
WALL MOUNT INSTALL
Install wall control unit to outlet box
using machine screws provided.
33
Lift Canopy to ceiling aligning the key hole slots
with the screws on the bottom of the Mounting
bracket. Rotate the canopy Counter Clockwise
to lock in place. Tighten the screws to secure
the Canopy. See inset for Keyhole shape
36
Loosen 2 screws and remove one
and save it. Place plate's key slotted
holes over the 2 screws loosened and
twist into place. Replace removed
screws and tighten all 3.
39
Remove cover by snaping off from top or bot-
tom. Remove battery cover. Install 12V battery
into wall remote. Duracell MN21 / Eveready A23
/ GP 23A all 12V.Attach cover of remote by plac-
ing over buttons and snap the battery cover in
place.
42
Attach front cover to wall control
with screws provided. Snap battery
cover in place.