Subscribe to Our Youtube Channel
Related Manuals for Monte Carlo Fan Company 5MHR52RBD-L Series
Summary of Contents for Monte Carlo Fan Company 5MHR52RBD-L Series
- Page 1 Owner’s Manual Ceiling Fan Installation Instructions For 5MHR52RBD-L Series Fans READ AND SAVE THESE INSTRUCTIONS Total fan weight with lights...
-
Page 2: Installation
Installation AFETY WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70- 1999), including fire-rated construction. - Page 3 Tighten 2 downrod set screws and Place canopy and then yoke cover on Install downrod into yoke. Align hole lock nuts. downrod. Thread leadwires and safe- in downrod with hole in yoke and ty cable through downrod as shown. install cross pin. Install keeper into cross pin.
- Page 4 If installing light kit skip step If installing light kit skip step 20 & 21 20 & 21 Align seams Align the arrow from light kit cover- To install fan witout light kit ,attach Align seams as shown above. with the light pan. All 3 arrows switch cap into grooves and twist to (Blades not shown should be aligned.
- Page 5 Remove screws with wrench. Remove the yoke from the mounting Remove the yoke from the motor by plate. removing 6 screws. Stick the plastic plate onto the hang- Thread safety cable through center Separate from bracket. ing bracket aligning the holes as hole of the mounting plate.
- Page 6 Lift motor aligning studs mounting Install by placing over screws and Tighten all screws. plate with holes on motor bracket. twisting.Reinstall screw taken out Re-install nuts and tighten. from step 28. HAND HELD INSTALL Refer back to step 22 for blade and light kit installation.
-
Page 7: Fan Speed
Remote Control Transmitter Features: FAN REVERSE LED LIGHT (Press once to change direction of MEDIUM SPEED the fan)Fanmust be running to reverse. LOW SPEED HIGH SPEED FAN OFF SETTING LIGHT ON/OFF SET- (Turns fan off only) TING AND DIMMER (Press and hold to dim light infinitively) FAN SPEED Depress “l dot”... -
Page 8: Troubleshooting
ROUBLE HOOTING If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart.
Need help?
Do you have a question about the 5MHR52RBD-L Series and is the answer not in the manual?
Questions and answers