Fuel Tank Cap; Brake - Sym Joyride 200 EFi User Manual

FUEL TANK CAP

1. Insert ignition switch key into the ignition switch,
and turn the key to the left, then the cap can be
removed.
2. Do not fill above the fuel upper limit when refueling.
3. Turn the fuel tank cap right, and simply push
the fuel tank cap. Fuel tank cap can be locked.
CAUTION:
• Main stand should be put down on the ground, engine should be shut off and flames should be
strictly prohibited to ensure safety when refueling.
• Do not fill above fuel upper limit when refueling. Otherwise, fuel will flow out through a hole on
the cap that may damage the body's painting, in serious cases, it may cause a fire to burn down
the scooter.
• Make sure the cap has been tighten properly.

BRAKE

• Avoid unnecessary sudden braking.
• Use front and rear wheel brakes simultaneously when braking.
• Avoid brake continuously for a long period of time because that may overheat the brakes and reduce its
braking efficiency.
• Slow down and brake early when riding in rainy days on slippery roads. Never apply the brakes suddenly
to prevent skidding and falling.
• Using only the front brake or the rear brake increases the risk of falling because the scooter is tend to
pulled to one side.
《Engine Brake》
Return the throttle valve handle back to its original position, and apply engine brake.
It is necessary to apply both brake and engine brake intermittently when riding on a long or stiff slope.
For Rear Wheel For Front Wheel
7.Use of Each Component
11