Disc Brake Inspection (Depending On Models) - Sym Joyride 200 EFi User Manual

Adjustment:﹙Drum type﹚
• The indentation of brake adjustment nut must be aligned with the pin. (see below figure)
Adjustment
• Turn the adjustment nut on brake arm of front and rear wheels to adjust the free play of hand-brake lever.
• Hold the hand-brake levers after adjusting with both hands until there is effective brake feeling.
• Measure the free play with a rule.
To increase
free play
To decrease
free play
Front wheel drum type
DISK BRAKE INSPECTION (Applicable for model equipped with disc brake.)
(Leak, damaged, looseness of brake line)
• Visual check brake lines for leakage, or damage, check
brake lines connections for looseness using a wrench or
similar tool, and check whether steering handle vibration
in driving, or any parts' interference may have damage
the brake lines. If so, bring your scooter to your
SANYANG dealer for repairing or service.
CAUTION:
• Please drive your scooter on a dry road surface slowly and operate front and rear brakes in order to
find out if there is any malfunction so as to ensure the scooter is at its optimum condition and safe to
ride.
10.Inspection and Maintenance before Riding
16
Pin
Adjustment nut
CAUTION:
When free play is between 10~20 mm, check
brake indicators of front and rear wheels. If the
arrow on the brake arm aligned with the "△"
marked on the brake disk, that means the brake
lining has been excessively worn, and must be
replaced immediately.
Rear wheel drum type
To decrease
free play
To increase
free play
Hose connection